Warp 9 Footpegs installed

The Warp 9 Footpegs are forged 7075-T6 aluminum pegs with permanent stainless steel teeth, made by Warp 9 Racing and sold here at GritShift. Two fitment versions cover Sur Ron, Segway, E Ride Pro, Talaria, Altis, ReRode, 79Bike, Zero XB and Arctic Leopard XF Pro; the 57 by 87 mm platform reuses the OEM spring and pin, at 2 lb.

Specs verified November 2026 against the live GritShift product page.

Specifications

Material Forged 7075-T6 aluminum
Teeth Permanent stainless steel
Platform 57 mm wide by 87 mm long
Hardware Reuses the OEM spring and pin
Fitment versions Talaria / Altis / Rerode, or Sur Ron LBX / E Ride Pro / Zero XB / Arctic XF, chosen at order
Warranty Lifetime per Warp 9: break or crack them and get new ones for free
Weight 2 lb
Fitment Arctic Leopard XF Pro, Sur Ron Light Bee X and S, Sur Ron Light Bee 2 X, Segway X160 and X260, E Ride Pro-S, Pro-SS, Pro-SS 2.0, 3.0 and 4.0, Pro-SR, Talaria Sting MX3, MX4 and MX5, Talaria XXX, Altis Powersports Sigma and Sigma MX, ReRode R1, 79Bike Falcon Pro and GT, Zero XB

What bikes do the Warp 9 Footpegs fit?

  • Arctic Leopard XF Pro
  • Sur Ron Light Bee X / S
  • Sur Ron Light Bee 2 X
  • Segway X160 / X260
  • E Ride Pro-S
  • E Ride Pro-SS, Pro-SS 2.0, Pro-SS 3.0, Pro-SS 4.0
  • E Ride Pro-SR
  • Talaria Sting MX3 / MX4 / MX5
  • Talaria XXX
  • Altis Powersports Sigma / Sigma MX
  • ReRode R1
  • 79Bike Falcon Pro / GT
  • Zero XB

Why replace the stock e-moto pegs with the Warp 9 Footpegs?

Stock pegs on these bikes are small, and a small peg gives your boot little to hold when the trail gets rough. The Warp 9 platform measures 57 mm wide by 87 mm long, which Warp 9 describes as a noticeably larger, more locked-in feel underfoot, and the stainless steel teeth grip the sole through jumps, hard landings and rock gardens so your feet stay in your riding position. The teeth are permanent, so there are no inserts to lose or replace.

How strong are forged 7075-T6 pegs?

Warp 9 forges the pegs from 7075-T6 aluminum, which keeps the weight down at 2 lb for the pair without giving up strength, and backs them with a lifetime warranty: break or crack a peg and Warp 9 replaces it free. Warp 9 describes them as a one-time upgrade you stop thinking about. If you want a wider Elite platform instead, the Warp 9 E-Moto Elite Foot Pegs we sell cover the Light Bee, E Ride Pro and 79Bike.

How do the Warp 9 Footpegs install?

The pegs are a direct swap that reuses your OEM spring and pin: pull the stock pivot pin, move the spring to the new peg, set it in the bracket and refit the pin. Order the version that matches your bike, because the two castings differ in their mounts: Talaria / Altis / Rerode on one, Sur Ron LBX / E Ride Pro / Zero XB / Arctic XF on the other. No new fasteners are in the box and none are needed.

Where can I buy the Warp 9 Footpegs?

Right here. We sell the Warp 9 Footpegs at GritShift, made by Warp 9 Racing. Browse every Light Bee part we carry in our Surron LBX Parts collection.

Deja un comentario

Todos los comentarios son moderados antes de ser publicados