Heavy Hitter 85 MX Fork Conversion Kit installed

The Heavy Hitter 85 MX Fork Conversion Kit is a CNC-machined cup kit, made by Heavy Hitter and sold here at GritShift, that lets a complete KTM 85 front end fit the Sur Ron Light Bee, Segway X160/X260 and Talaria Sting. Pre-pressed bearing races; 1.2 lb (Sur Ron version) or 1.5 lb (Talaria version).

Specs verified October 2026 against the live GritShift product page.

Specifications

Type Bearing cup kit for a complete KTM 85 MX front end
Construction CNC-machined cups with pre-pressed bearing races
Kit contents Bearing cups with pre-pressed races, two tapered bearings and dust seals
Versions Sur Ron and Talaria
Weight 1.2 lb (Sur Ron version), 1.5 lb (Talaria version)
Provides Correct triple clamp spacing and bearing fitment for the MX front end
Requires, sold separately A complete KTM 85 MX front end: fork tubes, triple clamps, front braking system, front wheel (19 in recommended), front axle and MX-style handlebars
Fork recommendation Air forks (2018 and newer) over dual-cartridge spring forks, for weight savings
Air fork clearance Check the two fender bolt posts on the bottom triple clamp; slight shaving may be needed depending on year and brand of clamp

What bikes does the Heavy Hitter 85 MX fork conversion kit fit?

  • Sur Ron Light Bee X
  • Sur Ron Light Bee S
  • Segway X160
  • Segway X260
  • Talaria Sting MX3
  • Talaria Sting MX4
  • Talaria Sting MX5

Why convert an e-moto to MX forks?

The stock front end on these bikes is derived from mountain bike suspension. Heavy Hitter's kit replaces it with proven MX fork capability from the KTM 85 platform, whose geometry eliminates the weak failure points and short service intervals of the OEM front end. Once the MX forks are on, the rider can dial in suspension settings for their own weight and riding style. The kit exists for riders pushing beyond what stock mountain bike suspension can handle.

What front end do I need to buy with the kit?

A complete KTM 85 MX front end is required and sold separately: fork tubes, triple clamps, the front braking system, a front wheel (Heavy Hitter recommends 19 in), the front axle and MX-style handlebars. Heavy Hitter recommends the air forks fitted to 2018 and newer bikes over dual-cartridge spring forks because they save weight. The kit provides the correct triple clamp spacing and bearing fitment so the front end goes on as a plug-and-play install.

Do KTM air forks need any modification?

Possibly a small one. With KTM air forks, check the clearance at the bottom for the two posts on the triple clamp where the fender bolts in; slight shaving may be needed depending on the year and brand of the triple clamp. The kit ships with the bearing cups, their races already pressed in, plus two tapered bearings and dust seals, so the rest of the installation needs no bearing work. Heavy Hitter makes a separate Big Sender E Ride 85 MX Fork Conversion Kit for the E Ride Pro; this kit's fitment is the Sur Ron, Segway and Talaria.

Where can I buy the Heavy Hitter 85 MX Fork Conversion Kit?

Right here. We sell the Heavy Hitter 85 MX Fork Conversion Kit at GritShift. Browse every Heavy Hitter part we carry in our Heavy Hitter collection.

Deja un comentario

Todos los comentarios son moderados antes de ser publicados