The EBMX Talaria X3 X9000 V3 Controller Plug N Play Kit is a high performance controller upgrade made by EBMX, sold here at GritShift, for the Talaria XXX and Talaria X3. Custom VESC firmware with FOC supports 6 kW to 50 kW; the kit includes the EggRider SW102 display, regen thumb throttle, harness and mount kit; 11 lb.
Specs verified October 2026 against the live GritShift product page and the EBMX tech sheet.
Specifications
| Bikes | Talaria XXX and Talaria X3 |
|---|---|
| Power range | 6 kW to 50 kW depending on build |
| Display | EggRider SW102 (SW102T) color display |
| Rated power | 50 kW, tested to 60 kW |
| Phase current | 1000 A continuous, 1600 A burst in race mode |
| Battery current | 500 A max line current |
| Input voltage range | 40 to 110V |
| Operating voltage range | 48 to 110V (26S) |
| Max efficiency | Over 95% |
| Motor control | Field Oriented Control (FOC), VESC based firmware custom modified by EBMX per bike model |
| Operating temperature | -25 to 80 degrees C (-13 to 176 degrees F) |
| Waterproof rating | IP67 |
| IO count | 68 inputs and outputs |
| MOSFETs | 30 x 120V Infineon |
| PCB | Multilayer with CNC copper busbars |
| Case | Full CNC alloy |
| Cooling | Optional liquid cooling support |
| Power distribution | Billet CNC bus bar system |
| Ride modes | 6 fully customizable power levels, street and race toggle, regen tuning, speed limits, field weakening |
| Throttle | Dual hall throttle support, 2 x ADC inputs |
| Wheel Lift Assist | Integrated IMU with programmable launch, stunt and anti loop modes |
| Sensor protocols | CAN, RS485, UART, PWM in and out |
| Kit contents | Plug and play harness, mount kit for the bike, SW102T color display, 1-2 harness, Bluetooth module, thumb throttle, heat sink and hardware |
| Circuit protection | 200 to 250 A ANL fuse and/or circuit breaker required to keep warranty coverage |
| Warranty | 2 years (stated on the product page) |
| Weight | 11 lb |
What bikes does the EBMX Talaria X3 X9000 V3 kit fit?
- Talaria XXX
- Talaria X3
Motor compatibility on the product page: OEM Talaria X3 and XXX motors, the EBMX XLB-60, the EBMX XUB-80, the QS138-70H and QS138-90H, and the other motors named there; two motors are listed as not compatible while in testing.
What does the X9000 V3 add to a Talaria XXX or X3?
EBMX's custom VESC firmware with Field Oriented Control opens a power window from 6 kW to 50 kW depending on the build, with 30 plus preloaded motor tunes so setup is fast. Adjustable speed limiters apply per ride mode, and the free iOS and Android app handles live tuning and OTA updates. The kit is IP67 rated, supports batteries up to 26S, and holds 500 A of battery line current with 1000 A continuous phase current and 1600 A bursts.
How is Wheel Lift Assist set up on the Talaria kit?
The integrated IMU enables programmable launch control, anti loop and stunt modes; EBMX stresses that WLA is not a wheelie mode and that it only reduces throttle or applies regen braking, never adding throttle. The rider enables it in the app after accepting a waiver, double taps the display's On button, and sets a start angle, a throttle off angle (50 degrees by default for launching) and a maximum angle where braking force applies, with at least 30 degrees between start and throttle off. The EBMX Wheel Lift Assist sheet on the product page lists every setting.
What is in the box with the Talaria X3 X9000 V3 kit?
The kit includes the EggRider SW102 color display, a regen thumb throttle, the plug and play harness, the Talaria mount kit, a 1-2 harness, the Bluetooth module and the heat sink with hardware. Circuit protection is on the installer: a 200 to 250 A ANL fuse and/or circuit breaker must be fitted per the installation guide (QR code in the kit) to keep the 2 year warranty. The EBMX X-9000 V3 sheet covers the controller's 68 IO, CAN, RS485, UART and PWM support, and the Talaria pairs with the EBMX XTA-60 Core Motor Upgrade we carry for a full drivetrain build.
Where can I buy the EBMX Talaria X3 X9000 V3 Controller Plug N Play Kit?
Right here. We sell the EBMX Talaria X3 X9000 V3 Controller Plug N Play Kit at GritShift, made by EBMX. Browse every EBMX part we carry in our EBMX collection.
