SRAM Maven Ultimate brake caliper installed, close-up

The SRAM Maven Ultimate Series Brake Kit sold here at GritShift is a mineral fluid hydraulic brake with a 4-piston caliper, swing-link lever and 2000 mm (78 in) hose, pre-bled for rear use. Universal fitment on a standard post mount, 18 mm and 19.5 mm pistons, titanium hardware, polished silver finish, 1.6 lb.

Specs verified October 2026 against the live GritShift product page.

Specifications

Brake type Hydraulic brake kit, lever, hose and caliper, mineral fluid
Caliper 4-piston, standard post mount
Pistons 18 mm and 19.5 mm
Lever Swing-link lever, Stealth architecture, tool-free reach adjustment
Pads Organic, fitted as standard
Hose length 2000 mm (78 in)
Fluid Maxima Mineral Oil only
Configuration Pre-bled for rear brake use; hose can be shortened for front use
Included fittings Fill and bleed port fittings and extra brake line fittings for shortening
Hardware Titanium
Finish Polished silver
Weight 1.6 lb
Fitment Universal (verify first)

What bikes does the SRAM Maven Ultimate brake kit fit?

  • Universal. Check that your bike uses a standard post mount caliper and that the 2000 mm hose reaches your lever position before ordering.

Why run a mineral fluid brake on an e-moto?

SRAM builds the Maven Ultimate around mineral fluid and calls it the only mineral fluid brake that resists fade under hard use. The 18 mm and 19.5 mm pistons give it 50% more braking force and more fluid volume than most mineral fluid brake kits, so the fluid takes longer to reach its boiling point on a long descent. SRAM pairs that with a caliper it rates for stiffness, modulation and heat management, and a swing-link lever for a smoother pull.

What comes in the SRAM Maven Ultimate box?

You get one lever, one 2000 mm hose and one 4-piston caliper, assembled, filled and bled for a rear brake. SRAM includes fill and bleed port fittings plus extra brake line fittings, so the hose can be cut down for a front brake without buying parts. Organic pads are fitted.

How do I set up the Maven Ultimate for a front brake?

The kit arrives configured for the rear. For a front brake, shorten the hydraulic line to length and fit the new brake line fittings that ship in the box, then bleed with Maxima Mineral Oil. SRAM specifies that fluid only; do not use DOT fluid in this brake. Reach is adjusted at the lever without tools, and the caliper bolts to a standard post mount.

Where can I buy the SRAM Maven Ultimate Series Brake Kit?

Right here. We sell the SRAM Maven Ultimate Series Brake Kit at GritShift, made by SRAM. Browse every universal part we carry in our Universal E-Moto Parts collection.

Deja un comentario

Todos los comentarios son moderados antes de ser publicados