ProX 520 X-Ring Drive Chain, Gold, 120 Link

The ProX 520 X-Ring Drive Chain, Gold, 120 Link is a lightweight narrow sealed chain made for ProX by a Japanese OEM factory and sold here at GritShift. QX-type X-ring seals keep grease in and grit out, ProX rates it at least 150 percent more durable than a standard MX chain, and it weighs 4.2 lb.

Specs verified October 2026 against the live GritShift product page.

Specifications

Type 520 drive chain, sealed, QX-type X-ring
Links 120, with a clip-type master link
Color Gold
Durability At least 150 percent greater than a standard MX chain, per ProX
Steel High-grade Japanese steel, heat-treated plates, bushings and rollers
Pins Hardened outer layer over a softer core, heavy press-fitted and quad-staked
Bushings and rollers Solid bushings, shot-peened solid rollers
Inner plates Shaped, with lightening holes, about 3 percent lighter without giving up tensile strength
Factory prep Pre-stressed and pre-stretched to reduce initial stretch
Weight 4.2 lb
Fitment Universal 520, 120 link

What bikes does the ProX 520 X-ring chain fit?

  • Universal 520, 120 link; shorten the chain to suit your sprockets and swingarm

When is a sealed X-ring chain the better pick?

If your riding is trails, mud and dust rather than race laps, ProX makes the case for a sealed chain: the QX-type X-rings hold grease inside every pin and keep dirt and water out, so the chain stretches more slowly and needs less adjusting and lubing between rides. ProX rates it for at least 150 percent greater durability than a standard MX chain, and the narrow profile keeps the weight down.

How is the ProX 520 X-ring chain built?

Under the seals it shares its construction with ProX's MX race chain: high-grade Japanese steel, pins with a hardened outer layer over a softer core that are heavy press-fitted and quad-staked, solid bushings, shot-peened solid rollers, and heat-treated plates, bushings and rollers. Shaped inner plates with lightening holes trim about 3 percent of the weight without losing tensile strength, and the chain is pre-stressed and pre-stretched at the factory.

How should I fit and look after the ProX chain?

Cut the 120 link run to length, close it with the clip-type master link and set the slack to your bike's figure. ProX's own advice is to pair the chain with fresh sprockets, because hooked teeth shorten the life of any chain no matter how good the seals are. On an Ultra Bee, our own Heavy Hitter 520 Ultra Bee sprocket is the matching 520 rear, and the Heavy Hitter 520 primary drive moves the whole bike to 520 pitch. Clean the chain with a soft brush and chain cleaner rather than a pressure washer, so the X-rings keep their grease.

Where can I buy the ProX 520 X-Ring Drive Chain?

Right here. We sell the ProX 520 X-Ring Drive Chain, Gold, 120 Link at GritShift, made by ProX. Browse every universal e-moto part we carry in our Universal E-Moto Parts collection.

Deja un comentario

Todos los comentarios son moderados antes de ser publicados