The EBMX E Ride Pro 3.0 X9000 V3 Controller & Mount Kit is the EBMX controller upgrade for the E Ride Pro-SS 3.0, sold here at GritShift. Rated 50 kW with VESC based FOC firmware and 30 plus motor tunes, it ships plug and play with harness, mount and display; 10.9 lb without the circuit breaker, 12 lb with it.
Specs verified October 2026 against the live GritShift product page and the EBMX tech sheet.
Specifications
| Bike | E Ride Pro-SS 3.0 |
|---|---|
| Mount | Mount kit for the Pro-SS 3.0, all hardware and wiring harness included |
| Stock motor or battery limit | Up to 16 kW with the OEM Pro-SS 3.0 motor or the stock, non bypassed battery; exceeding it causes unsafe voltage sag |
| Options | With or without a circuit breaker |
| Rated power | 50 kW, tested to 60 kW |
| Phase current | 1000 A continuous, 1600 A burst in race mode |
| Battery current | 500 A max line current |
| Input voltage range | 40 to 110V |
| Operating voltage range | 48 to 110V (26S) |
| Max efficiency | Over 95% |
| Motor control | Field Oriented Control (FOC), VESC based firmware custom modified by EBMX per bike model |
| Operating temperature | -25 to 80 degrees C (-13 to 176 degrees F) |
| Waterproof rating | IP67 |
| IO count | 68 inputs and outputs |
| MOSFETs | 30 x 120V Infineon |
| PCB | Multilayer with CNC copper busbars |
| Case | Full CNC alloy |
| Cooling | Optional liquid cooling support |
| Power distribution | Billet CNC bus bar system |
| Ride modes | 6 fully customizable power levels, street and race toggle, regen tuning, speed limits, field weakening |
| Throttle | Dual hall throttle support, 2 x ADC inputs |
| Wheel Lift Assist | Integrated IMU with programmable launch, stunt and anti loop modes |
| Sensor protocols | CAN, RS485, UART, PWM in and out |
| Kit contents | Plug and play harness, mount kit for the bike, SW102T color display, 1-2 harness, Bluetooth module, thumb throttle, heat sink and hardware |
| Circuit protection | 200 to 250 A ANL fuse and/or circuit breaker required to keep warranty coverage |
| Warranty | 2 years (stated on the product page) |
| Weight | 10.9 lb without circuit breaker, 12 lb with circuit breaker |
What bikes does the EBMX E Ride Pro 3.0 X9000 V3 kit fit?
- E Ride Pro-SS 3.0
The product page notes two motors that are not compatible while EBMX tests them; the EBMX sheet lists the XLB, XUB and XTA series and the QS138 and QS165 motors as plug and play.
Why fit the X9000 V3 to an E Ride Pro-SS 3.0?
EBMX calls this kit the definitive power upgrade for the Pro-SS 3.0: up to 50 kW of output, tested to 60 kW, driven by VESC based custom firmware with Field Oriented Control and 30 plus preloaded motor tunes. It covers riders on a stock setup as well as full high power builds, and the free app handles live tuning, OTA updates and complete ride mode customization. On the stock Pro-SS 3.0 motor, or on the stock battery without a bypass, EBMX sets the safe ceiling at 16 kW; above that the battery sags to unsafe voltage.
Which ride controls does the Pro-SS 3.0 kit add?
Six customizable power levels, a street and race mode toggle, adjustable speed limiters per ride mode, regen tuning and field weakening settings are all configured from the app. The integrated IMU runs Wheel Lift Assist, tunable for anti loop, launch control or stunt mode, and the kit supports dual hall throttles on two ADC inputs with a regen thumb throttle in the box. The controller is IP67 rated, uses 30 Infineon 120V MOSFETs on a multilayer PCB with CNC copper busbars, and offers optional liquid cooling; see the EBMX X-9000 V3 sheet for the full feature list.
What is included with the E Ride Pro 3.0 X9000 V3 kit?
The box holds the plug and play harness, the Pro-SS 3.0 mount kit, the SW102T color display, a 1-2 harness, the Bluetooth module, the thumb throttle and the heatsink hardware, so no extra wiring or brackets are needed. EBMX requires a 200 to 250 A ANL fuse and/or circuit breaker on every V3 install to keep the 2 year warranty, and the kit is sold with or without that breaker. The Wheel Lift Assist sheet linked from the product page explains the IMU setup, and bigger builds can pair the kit with the EBMX XLB-60 Core or XUB-80 motors we carry.
Where can I buy the EBMX E Ride Pro 3.0 X9000 V3 Controller & Mount Kit?
Right here. We sell the EBMX E Ride Pro 3.0 X9000 V3 Controller & Mount Kit at GritShift, made by EBMX. Browse every EBMX part we carry in our EBMX collection.
