Regina 428 RX3 Non-Sealed Off-Road Chain Gold

The Regina 428 RX3 Non-Sealed Off-Road Chain sold here at GritShift is a gold 428 pitch chain without seals, built for the stresses of off-road riding, sold in 120 or 130 link lengths with a clip type connecting link, and rated by Regina at 5,170 lb (23,000 N) average tensile strength and 2.3 lb (1.03 kg) per 100 links.

Specs verified November 2026 against the live GritShift product page.

Specifications

Type Non-sealed 428 pitch off-road chain
Color Gold
Lengths 120 or 130 links
Connecting link Clip type, included
Average tensile strength 5,170 lb (23,000 N), from Regina's spec table
Plates 1.8 mm, thicker and shot-peened
Pin length 18.8 mm
Pins Chromized, larger diameter alloy carbon steel
Bushings Special shaped and extended; pin and bushing in full contact along their entire length
Rollers Solid
Inner links Beveled for sprocket engagement
Weight 2.3 lb (1.03 kg) per 100 links
Seals None
Fitment Universal 428 chain, for bikes that came with a non-sealed chain

What bikes does the Regina 428 RX3 fit?

  • Universal: e-minis and e-motos with a 428 pitch drive that left the factory on a non-sealed chain; keep a sealed chain on a bike that came with one

Why run the Regina 428 RX3 off road?

Regina's RX3 is built around a special shaped bushing that eliminates the barrel effect of a standard bushing, so the bushing and pin stay in full contact along their entire length instead of wearing at two points. The pins are chromized for exceptional surface hardness and maximum wear resistance, they are larger diameter alloy carbon steel, and they are matched to thicker shot-peened plates for increased tensile strength and fatigue resistance. Extended bushings and solid rollers add durability, and the inner links are beveled to improve sprocket engagement in the worst off-road conditions. Regina developed it to withstand the severe stresses of off-road riding while staying lightweight.

How do I fit and size the Regina 428 RX3?

Pick the 120 or 130 link length that covers your gearing, shorten it to the count your bike takes and join it with the clip type connecting link supplied, clip opening away from the direction of travel. It pairs with any standard 428 rear sprocket, including our Heavy Hitter 428 billet super sprocket. Regina also makes the sealed 428 ZSE Z-ring chain for bikes that came with a sealed chain, and the 520 RX3 for 520 pitch drives.

Regina's spec table puts the 428 RX3 at 1.8 mm plates, an 18.8 mm pin length and 1.03 kg per 100 links, which is 2.3 lb per 100 links.

How do I look after a non-sealed Regina chain?

With no seal between the plates, dirt and water reach the pins directly, so the RX3 wants cleaning after every muddy or wet ride and a fresh coat of chain lube before the next one, plus a slack check at the tightest point of the suspension travel. The gold finish makes a dry or rusting chain easy to spot at a glance.

Where can I buy the Regina 428 RX3?

Right here. We sell the Regina 428 RX3 Non-Sealed Off-Road Chain Gold at GritShift, made by Regina. Browse every universal e-moto part we carry in our Universal E-Moto Parts collection.

Deja un comentario

Todos los comentarios son moderados antes de ser publicados