TECH Suspension E39 Racing Kashima Fork for E-Motos, e39 Racing triple clamp and Kashima Coat outer tubes

The TECH Suspension E39 Racing Kashima Fork for E-Motos is a 39 mm upside-down, dual-crown coil fork for lightweight e-motos, made by TECH Suspension and sold here at GritShift. It runs DLC-treated steel stanchions in Kashima Coat aluminum outer tubes, gives 230 mm of travel on a 770 mm axle to crown, and adds tool-free preload and rebound adjusters.

Specs verified October 2026 against the live GritShift product page.

Specifications

Fork type 39 mm upside-down (USD) dual-crown coil fork for lightweight e-motos
Stanchions 39 mm alloy steel with DLC (diamond-like carbon) treatment
Outer tubes Anodized aluminum with Kashima Coat
Travel 230 mm
Axle to crown 770 mm
Damping Dual open-cartridge system
Bottom-out Hydraulic bottom-out protection (TECH product page)
Compression 22 clicks, adjuster at the bottom of each leg
Rebound 32 clicks, tool-free adjuster on top of each leg
Preload 8 mm, tool-free adjuster; each clockwise turn adds 1 mm (TECH manual)
Springs fitted Medium in both legs, rated for riders of 130 to 175 lb (60 to 80 kg)
Spring options Extra Soft and Extra Hard also available; mixing rates between the legs gives five settings
Triple clamps CNC-machined 6082 aluminum, black; drop upper crown included
Front wheel size 21 in with the included drop crown; 19 in with the flat crown, sold separately
Axle clamps Forged aluminum, black (TECH product sheet)
Brake mount 74.2 mm caliper mount included, for the Sur Ron Light Bee X (LBX), 79Bike and ReRode e-motos; other bikes need the bolt-on TECH E39 brake adapter, sold separately
Service intervals Dust seals every 8 hours or 1 month in dust or mud, oil change every 35 hours or 3 months, full inspection every 100 hours or 1 year
Fork oil TECH OJ01 SAE 5, 295 cc per leg (TECH manual)
Warranty Two-year transferable warranty and TECH's 10 Year Support Promise
Origin Designed and assembled in Tuscany, Italy (TECH product sheet)
Fitment Universal E-Moto (verify first)

What bikes does the TECH E39 Racing fork fit?

  • Universal E-Moto: confirm your e-moto's headset and steerer, front wheel size (21 in with the drop crown, 19 in with the flat crown) and front brake mount (74.2 mm caliper mount included) before ordering

Which e-motos does TECH Suspension list for the E39 Racing?

TECH Suspension's own product sheet names the Sur Ron Light Bee, the Talaria Sting MX3, MX4 and MX5, the E Ride Pro-SS 3.0, Pro-SS 4.0 and Pro-SR, the Arctic Leopard XF, XE Pro S and XE Pro S Enduro (with a headset shim), the Ventus V1, V1+ and V1+ EVO (with a new front wheel), the ReRode R1 and R1+, and the 79Bike Falcon Pro and GT. That is the maker's compatibility list. The E39 Racing itself is a universal e-moto fork, so check your bike's brake mount, front wheel size and headset against the fork and the brake adapter versions below before you order.

What do Kashima Coat and DLC do on the E39 Racing?

Kashima Coat is a hard-anodizing treatment developed by the Miyaki Company in Japan that builds a lubricating element into the anodized layer, and TECH rates it at about 13% less friction on the aluminum outer tubes. DLC, or diamond-like carbon, is a carbon-based coating on the 39 mm steel stanchions that pairs diamond-like hardness with the low friction of graphite, and TECH puts its friction reduction at about 35%. Lower friction lets the fork move more smoothly through its 230 mm of travel, which improves small-bump sensitivity, front-wheel tracking and traction, and both treatments resist wear so the action stays smooth through extended use. The gold Kashima finish is the same look found on factory racing suspension.

How do I adjust the E39 Racing fork?

Rebound is set with the tool-free knob on top of each leg across 32 clicks, and compression with the adjuster at the bottom of each leg across 22 clicks; the TECH manual says clockwise slows the stroke, counterclockwise speeds it up, and suggests starting halfway through the clicks. The tool-free preload adjuster on each cap adds 1 mm of spring preload per clockwise turn, up to 8 mm. TECH's product page also lists hydraulic bottom-out protection for the end of the stroke. Underneath, TECH built the E39 Racing on a dual open-cartridge damping system with a 39 mm chassis and CNC-machined 6082 aluminum triple clamps for a front end that takes heavy hits, smooths rough terrain and stays precise under braking.

Which spring rate do I need for the E39 Racing?

The fork ships with Medium springs in both legs, which TECH rates for riders of 130 to 175 lb (60 to 80 kg). TECH's manual lists five settings by mixing its three spring rates between the legs: Extra Soft for riders up to 110 lb (50 kg), Soft (Medium left, Extra Soft right) for 110 to 130 lb (50 to 60 kg), Medium for 130 to 175 lb (60 to 80 kg), Hard (Extra Hard left, Medium right) for 175 to 200 lb (80 to 90 kg) and Extra Hard for riders of 200 lb (90 kg) and up. TECH adds that aggressive riders on rough terrain or big jumps should consider a stiffer rate than their weight alone suggests.

Which brake adapter and crown does the E39 Racing need?

The 74.2 mm caliper mount that comes with the fork suits the Sur Ron Light Bee X (LBX), 79Bike and ReRode e-motos, so those bikes bolt their front caliper straight on. Other bikes need the bolt-on TECH Suspension E39 Fork Front Brake Adapter for E-Motos, sold separately, which we offer in versions for the Altis Sigma, the Arctic Leopard XE Pro S, Pro S Enduro and XF (with the headset spacer included), the E Ride Pro-SS 3.0, SS 4.0 and SR, and the Talaria MX5 and Ventus V1+ EVO. The included drop upper crown is set up for a 21 in front wheel; a flat upper crown for 19 in wheels is sold separately.

How do I service the E39 Racing fork?

TECH's E39 use and maintenance manual (revision 1, February 2026) calls for a wash with water and mild soap plus a visual inspection before and after every use, a dust seal clean every 8 hours or 1 month when dust or mud is present, an oil change every 35 hours or 3 months and a full inspection every 100 hours or 1 year, with shorter intervals for repeated riding in extreme conditions. The oil chart specifies TECH OJ01 SAE 5 oil, 295 cc per leg. Torque figures from the manual: crown bolts 8 to 9 Nm with greased threads, lower leg bolts 9 to 10 Nm in a 1-2, 1-2 sequence, axle locknut 16 to 17 Nm, top cap 11.7 to 13.7 Nm and the cartridge rod locknut 18.6 to 20.6 Nm. TECH recommends original spare parts and lubricants and says adjustments should be made by experienced personnel.

Where can I buy the TECH Suspension E39 Racing Kashima Fork for E-Motos?

Right here. We sell the TECH Suspension E39 Racing Kashima Fork for E-Motos at GritShift, made by TECH Suspension. Its rear-end partner with the same Kashima Coat and DLC treatment is the TECH Suspension ER34 Racing Kashima Shock for E-Motos. Browse every fork and shock we carry in our Forks & Shocks collection.

Deja un comentario

Todos los comentarios son moderados antes de ser publicados