The Heavy Hitter Billet Aluminum Adjustable Footpeg Bracket is a solid three-piece 7075-T6 billet aluminum mount for the E Ride Pro-S, Pro-SS, Pro-SS 2.0, Pro-SS 3.0 and Pro-SR, sold by GritShift. Its multi-hole layout puts the OEM footpegs at stock height or 25 mm lower, and the kit weighs 2 lb with all hardware included.
Specs verified September 2026 against the live GritShift product page and the Heavy Hitter tech sheet.
Specifications
| Material | 7075-T6 billet aluminum |
|---|---|
| Weight | 2 lb |
| Design | Solid three-piece: two footpeg support bodies and a center crossbar, with two support end caps |
| Peg positions | Stock height or 25 mm lower |
| Footpegs | Works with the OEM footpegs |
| Access window | Precision-cut opening reaches the triangle mounting bolts without removing the brackets |
| Hardware | Included: 2× stainless steel countersunk hex screws M8×1.25×25 and 8× stainless steel set screws M4×0.7×8 |
| Mounting screw torque | 16 to 18 Nm (12 to 13 ft·lb) |
| Set screws | Install with blue thread locker, leaving 3 mm exposed for the footpeg clevis mount |
| Tools | 5 mm and 2 mm Allen wrenches, torque wrench |
| Thread locker | Medium-strength (blue) |
| Kickstand sensor | The OEM kickstand sensor must be removed to use these brackets |
What bikes does the Heavy Hitter Adjustable Footpeg Bracket fit?
- E Ride Pro-S
- E Ride Pro-SS
- E Ride Pro-SS 2.0
- E Ride Pro-SS 3.0
- E Ride Pro-SS 4.0
- E Ride Pro-SR
Why move the footpegs on an E Ride Pro?
Peg position sets how planted a rider feels. These brackets let an E Ride Pro owner keep the stock peg height or drop the pegs 25 mm for a lower, more aggressive stance, using the same OEM footpegs. The brackets are milled from 7075-T6 billet so they hold that position with minimal flex under heavy load, and a cross support bar ties the two sides together for rigidity. Heavy Hitter tested them with real riders before release.
What is in the box?
- Footpeg support body 1 and footpeg support body 2 (7075-T6 billet)
- 1× center crossbar
- 2× support end caps
- 2× stainless steel countersunk hex screws M8×1.25×25
- 8× stainless steel set screws M4×0.7×8
How do I install the footpeg brackets?
You need 5 mm and 2 mm Allen wrenches, a torque wrench and medium-strength blue thread locker. Remove the OEM kickstand sensor first; the product page states it has to come off to run these brackets. Fit the two support bodies and the center crossbar, then torque the two M8×1.25×25 countersunk screws to 16 to 18 Nm (12 to 13 ft·lb). Install the eight M4×0.7×8 set screws with blue thread locker and leave 3 mm of each set screw exposed so the footpeg clevis mount can seat on it. The exploded view is in the Heavy Hitter Adjustable Footpeg Bracket tech sheet (PDF).
Do I have to remove the brackets to service the suspension triangle?
No. A precision-cut access window in each bracket lines up with the triangle mounting bolts, so you can reach those bolts with the brackets still on the bike, which makes maintenance faster and easier.
Where can I get it?
The Heavy Hitter Billet Aluminum Adjustable Footpeg Bracket is made by Heavy Hitter and sold by GritShift.
