Heavy Hitter 220mm Rear Brake Rotor Upgrade 2.2mm Thick

Heavy Hitter makes the Heavy Hitter 220mm Rear Brake Rotor Upgrade 2.2mm Thick for the rear wheel of the Sur Ron Light Bee X, Segway X260, E Ride Pro-S and Pro-SS, Talaria and more, and we sell it here at GritShift: heat-treated 410 stainless steel, 2.2 mm thick, M6 x 54 mm bolt pattern, 2 lb.

Specs verified November 2026 against the live GritShift product page.

Specifications

Position Rear wheel
Diameter 220 mm
Thickness 2.2 mm
Bolt pattern M6 x 54 mm
Material Heat-treated 410 stainless steel
Weight 2 lb
Construction Localized thickening in the critical cross sections
Design Maximum pad surface area and heat dissipation
Caliper fit 2.2 mm thickness for the majority of mineral fluid calipers; confirm compatibility with your caliper
Caliper spacers A bike that came stock with a 203 mm rotor may need 220 mm caliper spacers; both ReRode R1 models require 220 mm rear caliper spacers

What bikes does the Heavy Hitter 220mm 2.2mm rear rotor fit?

  • Sur Ron Light Bee X (2017 to 2024)
  • Segway X160
  • Segway X260
  • Ventus ONE+
  • 79Bike Falcon Pro
  • 79Bike Falcon GT
  • Rawr Mantis X
  • Rawr Mantis Pro
  • E Ride Pro-S
  • E Ride Pro-SS
  • E Ride Pro-SS 2.0
  • Talaria Sting MX3
  • Talaria Sting MX4
  • Talaria XXX
  • Stage2 M2
  • ReRode R1 (requires 220 mm rear caliper spacers)
  • ReRode R1+ (requires 220 mm rear caliper spacers)
  • Zero XB

Why is the rear rotor 2.2 mm thick?

Because Heavy Hitter sizes this disc for the majority of mineral fluid calipers, and asks you to confirm compatibility with your caliper before ordering. Everything else matches the 3 mm rear rotor: 220 mm diameter, heat-treated 410 stainless steel and the M6 x 54 mm bolt pattern that drops onto the stock rear hub of the Light Bee X, Segway X160 and X260 and the rest of the list.

What stops a thin rear rotor from warping?

Localized thickening in the critical cross sections means the disc is not a uniform 2.2 mm plate; the sections that take the braking load carry more metal. The 410 stainless steel is heat-treated for enhanced durability and long service life, and the 220 mm outline is cut for maximum pad surface area and heat dissipation. Heavy Hitter builds it for the heat and load of aggressive riding that most aftermarket rotors cannot survive.

Do ReRode R1 bikes need rear caliper spacers?

Yes, both of them. The ReRode R1 and the ReRode R1+ both require 220 mm rear caliper spacers, which differs from the front rotor where only the R1 needs them. More generally, any bike that came stock with a 203 mm rear rotor may need 220 mm caliper spacers.

Which front rotor matches this rear disc?

The Heavy Hitter 220mm Front Brake Rotor Upgrade 2.2mm Thick, the same steel and thickness drilled for the front hub. Riders whose calipers take a wider disc can run the 220mm Rear Brake Rotor Upgrade 3mm Thick instead; the E Ride Pro-SS 3.0, 4.0 and SR use the separate SR/3.0 rear rotor and are not on this list.

Where can I buy the Heavy Hitter 220mm Rear Brake Rotor Upgrade 2.2mm Thick?

Right here. We sell the Heavy Hitter 220mm Rear Brake Rotor Upgrade 2.2mm Thick at GritShift. Browse every Heavy Hitter part we carry in our Heavy Hitter collection.

Deja un comentario

Todos los comentarios son moderados antes de ser publicados