The EXT E Ride Pro-Mini R Suspension Package is a fork and shock upgrade for the E Ride Pro Mini R, made by EXT and sold here at GritShift. It pairs a Ferro 36 Mini EMX fork at 180 mm travel with a Vecta 230 x 65 mm coil shock, a custom rear link and mounting hardware, at 16 lb.
Specs verified November 2026 against the live GritShift product page.
Specifications
| Fork | EXT Ferro 36 Mini EMX, dual crown inverted MX fork, lowered to 180 mm of travel for the Mini R |
|---|---|
| Fork stanchions | 36 mm, hard-chromed, heat-treated 42CrMo4 with a Superfinish surface treatment |
| Fork air system | HS3, twin positive chambers plus a large self-balancing negative chamber |
| Fork damper | 3-way cartridge: independent high speed compression, low speed compression and rebound |
| Fork offset | 44 mm |
| Fork brake mount | 200 mm post mount brake tab |
| Fork axle | Boost spacing, 20 mm hexagonal floating axle; hub adaptor included; the stock fender fits |
| Shock | EXT Vecta coil shock, 230 x 65 mm |
| Shock adjustment | Low speed compression, high speed compression and low speed rebound, plus user-adjustable hydraulic bottom-out control |
| Shock pistons | 29 mm high-flow main piston, 24 mm valve piston |
| Shock shaft | 14 mm, 50% larger than most coil shock shafts per EXT |
| Reservoir pressure | 55 psi |
| Springs | 400, 450, 500, 550, 600 or 650 lb, chosen at order; EXT fits the spring to the rider |
| Included | Fork, shock, custom rear link, bolt-in mounting hardware, fork hub adaptor |
| Linkage note | The OEM linkage needs about 2 mm filed from the front side shock mount area to clear the shock body |
| Setup | EXT sets up every shock's hydraulics for the bike and the rider |
| Weight | 16 lb |
| Sold as | One package per spring rate: 400, 450, 500, 550, 600 or 650 lb |
| Fitment | E Ride Pro Mini R |
EXT E Ride Pro-Mini R Suspension Package spring rate chart
Spring rates in pounds, rider weight in pounds, as EXT recommends for the Vecta shock.
| Rider Weight (lb) | Plush | Firm |
|---|---|---|
| Up to 140 | 400 | 450 |
| 140 to 160 | 450 | 500 |
| 160 to 180 | 500 | 550 |
| 180 to 210 | 550 | 600 |
| 210 and up | 600 | 650 |
Ferro 36 Mini fork starting settings
Starting air chamber settings by rider weight in pounds for the Ferro 36 Mini fork, per EXT.
| Rider Weight (lb) | Plush Main Chamber (+) | Plush Ramp Chamber (++) | Firm Main Chamber (+) | Firm Ramp Chamber (++) |
|---|---|---|---|---|
| 120 lb | 70 | 88 | 80 | 110 |
| 140 lb | 80 | 100 | 90 | 125 |
| 160 lb | 90 | 113 | 105 | 150 |
| 180 lb | 100 | 125 | 120 | 170 |
| 200 lb | 110 | 138 | 130 | 180 |
| 220 lb | 120 | 150 | 145 | 200 |
What bikes does the EXT E Ride Pro-Mini R Suspension Package fit?
- E Ride Pro Mini R
Why replace both ends of the Mini R suspension at once?
EXT builds the package around one idea: suspension works best when both ends are matched. Swapping the fork and shock together puts fully adjustable EXT damping at both ends of the Mini R, so the bike stays balanced over rough ground instead of one end overwhelming the other, and both ends tune to your weight and riding style. The Ferro 36 Mini is the EMX fork lowered to 180 mm and optimized for the Mini R, and the Vecta shock arrives with its hydraulics set up by EXT for this bike and the rider who ordered it.
What is in the Ferro 36 Mini fork?
The Ferro 36 Mini is a dual crown inverted MX fork with 36 mm stanchions in hard-chromed, heat-treated 42CrMo4 steel finished with EXT's Superfinish treatment. Its HS3 air system runs twin positive chambers and a large self-balancing negative chamber, which EXT uses to hold the fork up through the whole stroke, and the 3-way cartridge damper gives independent high speed compression, low speed compression and rebound adjustment. The chassis carries a 44 mm offset, a 200 mm post mount brake tab and Boost spacing on a 20 mm hexagonal floating axle; a hub adaptor is in the box and the stock Mini R fender still fits. Starting air chamber settings by rider weight are in the chart above. The full-travel version of this fork is the EXT Ferro USD 36 EMX fork we also sell.
How is the Vecta shock set up for the Mini R?
The Vecta is a 230 x 65 mm coil shock with 3-way adjustment: low speed compression, high speed compression and low speed rebound, plus a hydraulic bottom-out control you can adjust yourself. Inside it runs a high-flow 29 mm main piston and a 24 mm valve piston on a 14 mm shaft, which EXT says is 50% larger than most coil shock shafts and is what lets it shrug off big side loads. Reservoir pressure is a low 55 psi, chosen for sensitivity and low cavitation. Spring rates run from 400 lb (plush) or 450 lb (firm) for riders up to 140 lb to 600 lb or 650 lb for riders over 210 lb; pick your weight band from the chart when you order, because EXT fits the spring to the rider before it leaves.
How does the package install on an E Ride Pro Mini R?
The package bolts in with the included mounting hardware and custom rear link, and the fork takes the Mini R front wheel through the supplied hub adaptor. One modification is called for at the rear: file about 2 mm from the front side shock mount area of the OEM linkage with a hand file so the Vecta shock body clears it. Set the fork chambers to the starting figures in the chart for your weight, then dial compression and rebound from there. Spring, fork setting and shock clicks all tune to the rider, so note your settings before you change them.
Where can I buy the EXT E Ride Pro-Mini R Suspension Package?
Right here. We sell the EXT E Ride Pro-Mini R Suspension Package, Fork and Shock at GritShift, made by EXT. Browse every fork and shock we carry in our Forks & Shocks collection.











