The ETM RTR Complete Plug N Play Headlight Kit sold here at GritShift is an Electro & Co lighting kit for the ETM RTR Lite, Standard, Sport and Reaper and the ETM Rizzler: headlight, DC-DC converter, handlebar switch, a bracket carrying the headlight and factory display, and a holder for the factory tool kit. 2 lb, plug and play.
Specs verified October 2026 against the live GritShift product page and the Electro & Co installation instructions
Specifications
| Type | Plug and play headlight kit with its own DC-DC converter and handlebar switch |
|---|---|
| Kit contents | Headlight, DC-DC converter, headlight on and off switch, multi-function mounting bracket for the headlight and the factory display, tool kit holder for the factory ETM RTR tool kit, wiring harness |
| Adapters | XT60 to XT90 adapters come in every kit, so the kit works on all year models listed |
| Hardware | Included; the kit has everything needed for the install: two socket head screws and square nuts for the headlight, four M6x12 mm screws and four M6 Nylock nuts for the DC-DC plate, two M6x12 mm screws each for the tool pouch holder and the DC-DC, and two cable holders with two M4 washers and two M4x8 mm screws for the brake line (Electro & Co instructions) |
| Wiring | Harness plugs into the male 3-pin connector on the DC-DC and the female 3-pin connector on the switch; headlight plugs into any 12V 2-pin accessory plug on the DC-DC; the female XT90 on the harness plugs into the male XT90 at the charge port |
| Weight | 2 lb |
| Thread locker | Blue medium strength thread locker recommended on the brake line cable holder screws and the DC-DC and tool pouch screws |
| Install guide | ETM RTR Headlight Installation Instructions (PDF), 17 steps over 6 pages |
| Fitment | ETM RTR Lite, ETM RTR Standard, ETM RTR Sport, ETM RTR Reaper, ETM Rizzler |
What bikes does the ETM RTR Complete Plug N Play Headlight Kit fit?
- ETM RTR Lite
- ETM RTR Standard
- ETM RTR Sport
- ETM RTR Reaper
- ETM Rizzler
What is in the ETM RTR headlight kit?
Five pieces plus the harness: the headlight itself, a DC-DC converter for consistent power delivery and full brightness, an on and off switch for the handlebar, a multi-function bracket that holds the headlight and the factory display together, and a holder for the tool kit that came with the bike. XT60 to XT90 adapters ship in every kit, which is why one kit covers every year model of the bikes above.
How does the headlight mount on the RTR?
Electro & Co moves the display onto the new bracket first. Per the instructions you pull the crossbar, front number plate, display and display bracket, bolt the display to the headlight mount with the OEM hardware, then fit that mount in the display bracket's old spot with the same OEM bolts. The headlight hangs on the bracket with the two socket head screws and square nuts from the kit, left loose until you set the beam angle, and the rear brake line is held to the bracket by two cable holders, flat side forward.
Where does the DC-DC converter go?
On the rear subframe, behind the right number plate. The mounting plate takes four M6x12 mm screws and four M6 Nylock nuts with the nuts on top, then the tool pouch holder and the DC-DC each take two M6x12 mm screws with the converter wires facing down. The instructions warn that the converter is a tight fit and tell you to turn the upper left nut parallel to the housing for clearance. Blue thread locker is recommended on these fasteners and on the cable holder screws.
How is the headlight kit wired?
Battery out of the bike, key cycled on and off to drain the controller. The harness plugs into the male 3-pin on the DC-DC and the female 3-pin on the switch, the headlight into any 12V 2-pin accessory plug on the converter, and the harness female XT90 into the male XT90 that sat on the battery at the charge port. Zip tie or strap the wires along the right side of the subframe away from sharp edges, refit the plastics and the battery, plug the harness male XT90 into the battery and the handlebar switch runs the light.
Where can I buy the ETM RTR headlight kit?
Right here. We sell the ETM RTR Complete Plug N Play Headlight Kit at GritShift, made by Electro & Co. Browse every ETM RTR part we carry in our ETM RTR Parts collection.











