Alienation Horsemen BMX Handlebar 8.75 inch Rise 22.2mm Clamp

The Alienation Horsemen BMX Handlebar is a four-piece bar in straight-gauge 4130 chromoly tubing, made by Alienation and sold here at GritShift. Its 8.75 inch rise and 29 inch width build a tall, wide cockpit on any 22.2 mm bar clamp, with 12 degrees of backsweep, 3 degrees of upsweep and a 50 mm knurled clamping area, at 2 lb.

Specs verified November 2026 against the live GritShift product page.

Specifications

Construction Four-piece BMX handlebar
Material Straight-gauge 4130 chromoly tubing, post-weld heat treated
Rise 8.75 in
Width 29 in
Backsweep 12 degrees
Upsweep 3 degrees
Crossbar 19 mm
Clamp diameter 22.2 mm
Clamping area 50 mm, deeply knurled
Finish Black
Weight 2 lb
Fitment Universal 22.2 mm handlebar clamp

What bikes does the Alienation Horsemen handlebar fit?

  • Universal 22.2 mm handlebar clamp: measure your stem or bar clamp bore, because most e-motos clamp a larger diameter bar and need a 22.2 mm stem to run this bar

Why choose a four-piece chromoly BMX bar?

A four-piece bar welds two uprights, a crossbar and the grip tube into one frame, and on the Horsemen every piece is straight-gauge 4130 chromoly that is heat treated after welding, which Alienation does to add strength to the finished bar rather than the raw tube. The 19 mm crossbar ties the uprights together and keeps the 8.75 in rise from flexing, so the bar stays stiff when you load it through a landing.

How tall and wide is the Horsemen bar?

The bar rises 8.75 in from the clamp and measures 29 in across the grips, which is a tall, wide cockpit that brings the controls up and out for a rider who stands on the pegs. Its geometry is 12 degrees of backsweep and 3 degrees of upsweep, so the grips angle back toward the rider and lift slightly at the ends, and the whole bar is finished in black.

How does the Horsemen bar fit a stem?

The clamping section is 22.2 mm, the BMX standard, with a deeply knurled 50 mm clamp area that bites into the stem faceplate so the bar cannot rotate under load. Check your stem bore before you order: the bar needs a 22.2 mm clamp, and the stems and direct mounts on most e-motos take a larger bar. Fit it with the knurling centered in the stem, torque the faceplate bolts evenly in a cross pattern to the stem maker's figure, then set your lever and grip positions.

Where can I buy the Alienation Horsemen BMX Handlebar?

Right here. We sell the Alienation Horsemen BMX Handlebar 8.75" Rise 22.2mm Clamp at GritShift, made by Alienation. Browse every handlebar we carry in our Handlebars & Accessories collection.

Deja un comentario

Todos los comentarios son moderados antes de ser publicados