The RFloXa RAB53RV Rear Shock sold here at GritShift is a universal 10.5 in (267 mm) coil rear shock with an external nitrogen reservoir and separated oil and gas damping. It carries rebound, high speed and low speed compression adjustment, an AL6061-T6 body, a 42CrMo main shaft and a 450 lb or 550 lb spring, at 7 lb (3.2 kg).
Specs verified October 2026 against the live GritShift product page
Specifications
| Type | Coil rear shock with external nitrogen reservoir, oil and gas separated |
|---|---|
| Length | 10.5 in (267 mm), sold as a universal shock |
| Adjustments | Multi-stage rebound, high speed compression and low speed compression |
| Spring rates | 450 lb or 550 lb, chosen at purchase |
| Spring | Removable, for quick adjustment and upkeep |
| Upper mount | AL6061-T6 forged aluminum |
| Main tube | AL6061-T6 aluminum alloy |
| Main shaft | 42CrMo steel |
| Spring base | C-ring retainer |
| Air chamber | Rubber bladder, to limit heat-induced damping fade |
| Weight | 7 lb (3.2 kg), either spring rate |
What bikes does the RFloXa RAB53RV rear shock fit?
- Universal. It is sold as a universal 10.5 in (267 mm) shock for e-bikes, bicycles and off-road electric bikes, so measure your stock shock and confirm the length, mount widths and bolt sizes before ordering.
What adjustments does the RAB53RV give you?
Three circuits, each with multi-stage adjustment: rebound, high speed compression and low speed compression. RFloXa pairs them with an external nitrogen reservoir and an oil and gas separation damping structure, which it credits for reducing impact and keeping the damping consistent, and a rubber bladder in the air chamber that limits heat-induced damping fade on long descents. The spring is removable, so a rate change or a service does not mean sending the whole shock away.
What is the RAB53RV built from?
The upper mount is forged AL6061-T6 aluminum, the main tube is AL6061-T6 aluminum alloy and the main shaft is 42CrMo steel. A C-ring retainer forms the spring base, which RFloXa specifies for stability under load. The whole unit weighs 7 lb (3.2 kg) with either spring fitted.
Which spring rate should I choose, 450 lb or 550 lb?
The rate is fixed at purchase, with 450 lb as the softer option and 550 lb as the stiffer one; match the rate to the spring your bike runs now and to your own weight with gear. The external compression and rebound adjusters give tuning room either side of the spring, and the removable spring design means a change of rate later is a workshop job rather than a replacement shock.
How does the RAB53RV install?
It is a universal 10.5 in (267 mm) shock, so measure the stock shock before you order and confirm the mount widths and bolt sizes. We also sell the RFloXa RAF55RV Premium Rear Shock, built specifically for the Sur Ron Ultra Bee, if your bike is one.
Where can I buy the Rfloxa RAB53RV Rear Shock?
Right here. We sell the Rfloxa RAB53RV Rear Shock at GritShift, made by RFloXa. Browse every fork and shock we carry in our Forks & Shocks collection.











