The Heavy Hitter E-Ride Painless Billet Ignition Cover is a CNC-machined billet aluminum replacement for the OEM ignition cover on the E Ride Pro-S, Pro-SS, 2.0, 3.0, 4.0 and SR, made by Heavy Hitter and sold here at GritShift. It comes off without removing the battery lid, weighs 0.34 lb and mounts with two M6x16 screws.
Specs verified September 2026 against the live GritShift product page and the Heavy Hitter tech sheet.
Specifications
| Material | CNC-machined billet aluminum |
|---|---|
| Weight | 0.34 lb |
| Color options | Red, Black, Blue, Gold, Silver, Purple |
| Cable exit | Enlarged, chamfered opening to prevent pinched handlebar control wiring |
| Hardware | Included: 2 x stainless steel socket head screws M6x16 |
| Torque, M6x16 screws | 7 to 8 Nm (5 to 6 ft·lb) |
| Tools | 5 mm Allen wrench, torque wrench, medium-strength thread locker |
| Installation | Direct bolt-on replacement for the OEM ignition cover |
| Compatibility note | Not compatible with long seat bike configurations |
| Tech sheet | Heavy Hitter E-Ride Mini Mod Ignition Cover assembly guide (PDF) |
What bikes does the Heavy Hitter E-Ride ignition cover fit?
- E Ride Pro-S
- E Ride Pro-SS
- E Ride Pro-SS 2.0
- E Ride Pro-SS 3.0
- E Ride Pro-SS 4.0
- E Ride Pro-SR
It is not compatible with long seat bike configurations.
Why is it called the Painless ignition cover?
Because the OEM cover is a pain to get off: you literally have to remove the battery lid to reach it. Heavy Hitter redesigned the fit so this cover comes off without removing anything else on the bike, which gets you into the electrical compartment quickly to service, update or swap a part. That saves time at the track, in the woods and in the garage by removing the battery lid dependency.
What does the redesigned cable exit do?
The cable exit was redesigned with a larger, chamfered opening. Handlebar control wiring routes cleanly between the frame and the cover instead of being pinched, and the smooth chamfer prevents wire damage over time. It is the kind of small mod that pays for itself the first time you open the compartment.
How do I install the billet ignition cover?
Remove the OEM cover and bolt the Heavy Hitter cover on with the two included M6x16 stainless steel socket head screws, using a 5 mm Allen wrench and a torque wrench. Torque both screws to 7 to 8 Nm (5 to 6 ft·lb) with medium-strength thread locker on the threads. The exploded view is on the assembly guide (PDF).
Where can I buy the Heavy Hitter E-Ride Painless Billet Ignition Cover?
Right here. We sell the Heavy Hitter E-Ride Painless Billet Ignition Cover at GritShift. Browse every Heavy Hitter part we carry in our Heavy Hitter collection.
