The Electro & Co Tuttio Soleil 01 Ultimate Upgrade Kit sold here at GritShift replaces the stock power system of a Tuttio Soleil 01 pit bike with a 72V 25Ah battery, an ETM RTR controller and an E&C QS built brushless motor, plus the brackets, harness, throttle, 9T sprocket and 420 chain to run them, in one 45 lb box.
Specs verified October 2026 against the live GritShift product page
Specifications
| Type | Complete electric power upgrade kit |
|---|---|
| Battery | 72V 25Ah, with a matching 5A charger |
| Controller | ETM RTR controller |
| Motor | Electro & Co QS built brushless motor |
| Drive | 9T front sprocket and a new heavy-duty 420 chain |
| Brackets | Aluminum controller, battery and motor brackets; the battery bracket is spring loaded |
| Also in the box | Aluminum skid plate, plug-and-play wiring harness, RTR throttle, power switch |
| Install | Bolt on and plug in; every bracket and connector is made for the Tuttio |
| Weight | 45 lb (20.4 kg) |
What bikes does the Tuttio Soleil 01 Ultimate Upgrade Kit fit?
- Tuttio Soleil 01
Why upgrade the stock Tuttio Soleil 01 power system?
Electro & Co says the Tuttio has a chassis worth building on under its stock plastic and weak power. This kit swaps the whole power system at once, so the bike gets more torque, more top speed and far more ride time from the 72V 25Ah battery, the ETM RTR controller and the QS built brushless motor, and can keep up with bigger bikes on the trail and over jumps. The result is what Electro & Co calls a full E&C Ripper.
What is in the Tuttio Soleil 01 upgrade kit box?
Everything is in one box: the 72V 25Ah battery with its 5A charger, the ETM RTR controller, the E&C QS built brushless motor, a 9T front sprocket chosen for the best overall performance, a new heavy-duty 420 chain, aluminum controller, battery and motor brackets (the battery bracket is spring loaded), an aluminum skid plate, a plug-and-play wiring harness, an RTR throttle and a power switch. Electro & Co states there are no mystery parts, no wiring puzzles and no hardware store runs, because every bracket and connector is made for the Tuttio.
How does the Tuttio upgrade kit install?
Bolt it on, plug it in and ride. Remove the stock battery, controller and motor, fit the aluminum brackets and skid plate, mount the new motor with the 9T sprocket and the 420 chain, slide the battery into its spring loaded bracket, then connect the plug-and-play harness, throttle and power switch. Recheck every fastener after the first ride.
Where can I buy the Electro & Co Tuttio Soleil 01 Ultimate Upgrade Kit?
Right here. We sell the Electro & Co Tuttio Soleil 01 Ultimate Upgrade Kit at GritShift, made by Electro & Co. Browse every power upgrade we carry in our Power Upgrades collection.











