Heavy Hitter Big Sender E Ride 85 MX Fork Conversion Kit installed

The Heavy Hitter Big Sender E Ride 85 MX Fork Conversion Kit is a CNC 7075 aluminum bearing cup kit, made by Heavy Hitter and sold here at GritShift, that lets an E Ride Pro-S, Pro-SS, Pro-SS 2.0, 3.0, 4.0 or Pro-SR run a complete KTM, Gas Gas or Beta 85cc MX front end. Bearings and cups included, 1.4 lb.

Specs verified September 2026 against the live GritShift product page.

Specifications

Material Precision-machined CNC 7075 aluminum
Type Bearing cup kit for an 85cc MX front end
Weight 1.4 lb
Included New bearings and cups; the OEM cups and bearings are completely replaced
Bearing races Pre-pressed for simple installation
Fit to frame Tight press fit to the frame's steer tube
Compatible front ends Complete KTM, Gas Gas or Beta 85cc MX front end (known and tested compatibility)
Requires, sold separately Complete KTM 85 MX front end: fork tubes, triple clamps, front braking system, front wheel, front axle and MX handlebars
Fork recommendation Air forks (2018 and newer) are lighter; dual cartridge spring forks are heavier; Heavy Hitter prefers air forks

What bikes does the Heavy Hitter Big Sender fork conversion kit fit?

  • E Ride Pro-S
  • E Ride Pro-SS
  • E Ride Pro-SS 2.0
  • E Ride Pro-SS 3.0
  • E Ride Pro-SS 4.0
  • E Ride Pro-SR

Why put 85cc MX forks on an E Ride Pro?

Heavy Hitter designed the Big Sender kit for riders who have pushed the stock mountain bike-derived front end to its limits and need a real MX fork setup. An 85cc MX front end brings proper adjustability, shorter service intervals than the OEM fork and the ability to run a wider variety of front wheels, and it eliminates the weak failure points of the stock front end. Heavy Hitter also points out that the 85cc KTM platform is sprung accurately for the weight of the E Ride, especially once upgraded batteries and accessories add mass, so the rider can dial in fork settings for their weight and riding style.

What is in the box and what do I need to add?

The kit includes new bearings and cups that completely replace the OEM cups and bearings, with the bearing races pre-pressed for simple installation and a tight press fit to the frame's steer tube. Everything else comes from the donor front end, which is not included: fork tubes, triple clamps, the front braking system, a front wheel, the front axle and MX handlebars from a complete KTM 85 MX front end.

Which 85 forks work, air or spring?

Heavy Hitter describes two options. Air forks from 2018 and newer bikes are lighter; dual cartridge spring forks are heavier. From Heavy Hitter's experience, air forks are the preferred choice. The KTM, Gas Gas and Beta 85cc front ends are the known and tested compatibility; Heavy Hitter cautions that factory variations, optional equipment and aftermarket modifications on a donor front end could affect compatibility in a specific case, so verify before purchasing. Sur Ron, Segway and Talaria riders need the separate Heavy Hitter 85 MX Fork Conversion Kit, and E Ride riders can also read the Rogue 2.5 Inch Extended E Ride Billet Swingarm specs.

Where can I buy the Heavy Hitter Big Sender E Ride 85 MX Fork Conversion Kit?

Right here. We sell the Heavy Hitter Big Sender E Ride 85 MX Fork Conversion Kit at GritShift. Browse every Heavy Hitter part we carry in our Heavy Hitter collection.

Leave a comment

All comments are moderated before being published