The Heavy Hitter Titanium 1.5" Linkage Upgrade is a Ti-6Al-4V titanium rear linkage from Heavy Hitter, sold by GritShift, for the Sur Ron Light Bee X / S, Segway X160 / X260, Ventus ONE+ and 79Bike Falcon Pro / GT. It adds a 1.5-inch lift, weighs 7 ounces complete with bearings and sleeves, and installs in under 20 minutes.
Specs verified September 2026 against the live GritShift product page.
Specifications
| Material | Ti-6Al-4V titanium, machined from solid |
|---|---|
| Finish | Jet wash |
| Weight | 7 oz (complete linkage with bearings and sleeves) |
| Lift | 1.5 in over stock set to balance front grip, rake angle and rear grip |
| Bearings and sleeves | Included |
| Mounting hardware | Not included. Reuses the OEM linkage bolts already on the bike |
| Install time | Less than 20 minutes |
What bikes does the Heavy Hitter Titanium Linkage fit?
- Sur Ron Light Bee X
- Sur Ron Light Bee S
- Segway X160
- Segway X260
- Ventus ONE+
- 79Bike Falcon Pro
- 79Bike Falcon GT
Why replace the stock linkage?
The stock linkage on these platforms fails under big jumps and hard landings, and a broken linkage does not just end the ride, it typically bends the output shaft of the rear shock as well. The Heavy Hitter titanium linkage is machined from solid Ti-6Al-4V to eliminate that failure mode.
What does the 1.5-inch lift change?
The linkage raises the rear of the bike 1.5 inches over stock. Heavy Hitter set the lift to balance front grip, rake angle and rear grip rather than simply maximizing ride height.
What is in the box and how do I install it?
The linkage ships complete with its bearings and sleeves, at 7 ounces total. Mounting bolts are not included; the linkage reuses the OEM linkage bolts already on the bike. Installation takes less than 20 minutes.
Where can I get it?
The Heavy Hitter Titanium 1.5" Linkage Upgrade is made by Heavy Hitter and sold by GritShift.
