Warp 9 Titanium Linkage Bolt Kit installed

The Warp 9 Titanium Linkage Bolt Kit sold here at GritShift is a titanium rear linkage and shock bolt kit made by Warp 9 Racing for the Sur Ron Light Bee X, Segway X160 and X260 and Talaria Sting. Fully shanked bolts, a one-piece triangle pivot bolt, four neoprene washers, 13 mm Fuji lock nuts and thread lock, 3 lb.

Specs verified October 2026 against the live GritShift product page

Specifications

Material Titanium
Covers Rear linkage bolts, shock bolts and the triangle pivot bolt
Bolt design Fully shanked, so no threaded section cuts into the frame or swingarm; full shank reduces shock and linkage play
Triangle pivot bolt One-piece with a large flanged face that acts as a shield, replacing the OEM mix of loose bushings, plastic washers and undersized bolts
Washers 4 neoprene washers between the pivot bolt flange and the triangle to frame joint, to keep dirt and water off the needle cage bearing
Nuts 13 mm Fuji lock nuts, the same size as stock
Thread lock Blue thread lock included
Weight 3 lb
Sold as Sur Ron or Talaria fitment, chosen when ordering
Not compatible The Prickly linkage, because its bushings are slightly smaller than OEM
Fitment Sur Ron Light Bee X, Segway X260, Segway X160, Talaria Sting

What bikes does the Warp 9 Titanium Linkage Bolt Kit fit?

  • Sur Ron Light Bee X
  • Segway X260
  • Segway X160
  • Talaria Sting

Why replace the stock Sur Ron linkage bolts?

Warp 9 says it bent every OEM linkage and shock bolt on its own bike, and that stock bolts bend or strip on the first removal. Its fix is a fully shanked titanium bolt, so the threaded section never rides in the frame or swingarm bore, and a full shank that cuts down shock and linkage play. Warp 9 adds stronger threads and the proper thread lock as the two benefits that make the swap simple.

What is different about the triangle pivot bolt?

The triangle pivot bolt is a one-piece design with a large flanged face that acts as a shield. It does away with the OEM mixture of loose bushings, plastic washers and undersized bolts, and four neoprene washers sit between the pivot bolt flange and the triangle to frame joint to keep dirt and water away from the needle cage bearing. The lock nuts are 13 mm Fuji nuts, the same size as the stock ones, so your existing socket fits.

What is in the Warp 9 linkage bolt kit box?

The titanium bolts with the flanged triangle pivot bolt, the 13 mm Fuji lock nuts, the four neoprene washers and blue thread lock. Torque the linkage bolts to the figures in your bike's service documentation. Choose the Sur Ron option for the Light Bee X and Segway X160 and X260 or the Talaria option for the Sting. The kit will not fit the Prickly linkage, whose bushings are slightly smaller than OEM.

Where can I buy the Warp 9 Titanium Linkage Bolt Kit?

Right here. We sell the Warp 9 Titanium Linkage Bolt Kit at GritShift, made by Warp 9 Racing. Browse every Sur Ron Light Bee X part we carry in our Surron LBX Parts collection.

Leave a comment

All comments are moderated before being published