Titanium Surron Full Body Bolt Kit - Rerode R1

The Titanium Surron Full Body Bolt Kit for the Rerode R1 sold here at GritShift swaps the steel chassis hardware on a ReRode R1 for certified Grade 5 6AL-4V titanium in one order. The groups run from motor mount and subframe to rotors, calipers, peg pins and rear axle nut, rated 40 percent lighter than OEM, 0.9 lb (0.4 kg).

Specs verified October 2026 against the live GritShift product page

Specifications

Material Certified Grade 5 6AL-4V titanium
Threads Rolled throughout; greater fatigue strength than cut threads, per Titanium Surron
Finish Blue, Burnt Blue, Black, Gold, Green, Purple, Rainbow, Teal or raw Silver; anodized or PVD coating for corrosion resistance
Covers Motor mount, peg bracket, subframe, sprocket, top rear shock, triangle, battery tray, skid plate and bash guard, brake caliper, ignition cover, motor cover, controller, chain and mud guard, direct mount, handlebar to stem, brake handle, throttle, peg brace, rear rotor, controller dust cover, rotor guard fin, front rotor, rear mud guard, peg pins, kickstand bolt and nut, rear axle nut
Not included Fork bolts
Designed for A stock ReRode R1; aftermarket parts such as a seat riser, direct mount stem, peg drops, brakes or forks may need extra hardware
Versus OEM 40 percent lighter than the OEM bolts, with a greater strength to weight ratio than steel, per Titanium Surron
Weight 0.9 lb (0.4 kg)
Fitment ReRode R1

What bikes does the Titanium Surron full body bolt kit fit?

  • ReRode R1

Why replace the ReRode R1 chassis bolts in one kit?

Replacing bolts one group at a time leaves a bike with mixed finishes that is never quite done. Titanium Surron covers the R1 in a single pass instead, and the maker credits the Grade 5 6AL-4V alloy with a greater strength to weight ratio than steel at 40 percent less weight than the OEM bolts. Rolled threads are used throughout, which Titanium Surron says gives greater fatigue strength than cut threads, and the anodized or PVD coating adds corrosion resistance over the bare alloy.

Which R1 bolts are in the Titanium Surron kit and which are not?

The kit covers the motor mount, peg bracket, subframe, sprocket, top rear shock, triangle, battery tray, skid plate and bash guard, brake caliper, ignition cover, motor cover, controller, chain and mud guard, direct mount, handlebar to stem, brake handle, throttle, peg brace, rear rotor, controller dust cover, rotor guard fin, front rotor, rear mud guard, peg pins, kickstand bolt and nut and the rear axle nut. Fork bolts are not included. The kit is designed around a stock R1, so a seat riser, direct mount stem, peg drops, aftermarket brakes or forks may need extra hardware.

Which finishes does the kit come in?

Nine finishes: Blue, Burnt Blue, Black, Gold, Green, Purple, Rainbow, Teal and raw Silver. Torque each location to the figure in your ReRode documentation, and apply thread locker where the stock bolts used it.

Where can I buy the Titanium Surron Full Body Bolt Kit - Rerode R1?

Right here. We sell the Titanium Surron Full Body Bolt Kit - Rerode R1 at GritShift, made by Titanium Surron. Browse every ReRode R1 part we carry in our Rerode R1 Parts collection.

Laisser un commentaire

Tous les commentaires sont modérés avant d'être publiés