The Heavy Hitter Billet CRF450 V2 Footpeg Brackets are 7075 billet aluminum brackets from Heavy Hitter, sold here at GritShift, that let a Sur Ron Light Bee, Segway X160 or X260, Talaria Sting or E Ride Pro run Honda CRF and CR footpegs on OEM Honda springs and pins. Type 2 black anodized, 0.6 lb, with a spring groove retainer.
Specs verified September 2026 against the live GritShift product page.
Specifications
| Material | 7075 billet aluminum |
|---|---|
| Finish | Type 2 anodized, black |
| Weight | 0.6 lb |
| Footpeg interface | Honda CRF and CR footpegs, retained by OEM Honda springs and pins |
| Retainer | Spring groove retainer |
| Hardware | Bracket and mounting bolt/nut only |
| Not included | Footpeg and footpeg hardware; requires Honda CRF/CR springs and pins |
| Compatible Honda footpegs | CR125 and CR250 2002 to 2007; CRF150R 2007 to 2019; CRF250X 2004 to 2019; CRF450R 2002 to 2019; CRF450RX 2017 to 2019; CRF450X 2005 to 2019; CRF250L and CRF250M 2012 to 2018; CRF250 Rally 2017 to 2018 |
What bikes do the Heavy Hitter CRF450 footpeg brackets fit?
- Sur Ron Light Bee X
- Sur Ron Light Bee S
- Segway X160
- Segway X260
- Talaria Sting MX3
- Talaria Sting MX4
- Talaria Sting MX5
- E Ride Pro-S
- E Ride Pro-SS
- E Ride Pro-SS 2.0
- E Ride Pro-SS 3.0
- E Ride Pro-SS 4.0
- E Ride Pro-SR
Which Honda footpegs fit the brackets?
The brackets accept Honda CRF and CR footpegs and hold them with the OEM Honda springs and pins. Heavy Hitter lists these Honda fitments as compatible: CR125 and CR250 from 2002 to 2007, CRF150R from 2007 to 2019, CRF250X from 2004 to 2019, CRF450R from 2002 to 2019, CRF450RX from 2017 to 2019, CRF450X from 2005 to 2019, CRF250L and CRF250M from 2012 to 2018, and the CRF250 Rally from 2017 to 2018. Any footpeg sold for those bikes, from a budget peg to a titanium set, becomes an option for the e-moto.
Why run Honda footpegs on an e-moto?
Instead of one footpeg design that may or may not suit a rider, the brackets open the entire Honda OEM and aftermarket footpeg market to the e-moto. Riders pick the Honda peg they already trust from a dirt bike and run whatever peg they want. The V2 bracket is machined from 7075 billet aluminum with a type 2 black anodized finish.
What is in the box and what is not?
The bracket and its mounting bolt and nut only. The footpeg itself and its hardware are not in the box, and the brackets require Honda CRF or CR springs and pins to retain the peg. The spring groove retainer on each bracket ensures a clean install.
Where can I buy the Heavy Hitter Billet CRF450 V2 Footpeg Brackets?
Right here. We sell the Heavy Hitter Billet CRF450 V2 Footpeg Brackets at GritShift.










