Regina 520 RX3 Non-Sealed Off-Road Chain Gold

The Regina 520 RX3 Non-Sealed Off-Road Chain Gold sold here at GritShift is Regina's non-sealed 520 pitch off-road chain for e-motos, built light with chromized pins and shot-peened plates for bikes that came with a non-sealed chain. Sold in 110, 114 or 120 links with a clip link: 34,000 N (7,643 lbs) tensile strength, 3.4 lb per 100 links.

Specs verified November 2026 against the live GritShift product page.

Specifications

Type Non-sealed 520 pitch off-road chain, gold
Length 110, 114 or 120 links, each sold as a single chain
Connecting link Clip type, included with each chain
Weight 3.4 lb (1.56 kg) per 100 links, per the Regina spec table
Average tensile strength 34,000 N (7,643 lbs)
Plate thickness 2.0 mm, shot peened
Pin length 18.1 mm
Pins Larger diameter alloy carbon steel, chromized
Bushings Special shaped, extended, full pin contact along the whole length
Rollers Solid
Inner links Beveled for sprocket engagement
Seal None; regular cleaning and lube required
Fitment Universal 520 chain, for bikes that came with a non-sealed chain

What bikes does the Regina 520 RX3 chain fit?

  • Universal: any e-moto on a 520 pitch chain drive that came with a non-sealed chain; pick 110, 114 or 120 links to cover the count on the chain being replaced and shorten to suit

Why choose a non-sealed 520 chain?

The RX3 has no O-ring or Z-ring, which is the point: Regina developed it to stand up to the severe stresses of off-road riding while staying lightweight, and a non-sealed chain spins with less drag than a sealed one. The special shaped bushing eliminates the barrel effect of a standard bushing, so bushing and pin stay in full contact along their entire length, and the inner links are beveled so the chain finds the sprocket teeth even in the worst off-road conditions. The trade is upkeep: with no seal holding lube inside, it needs the regular cleaning and lube any non-sealed chain does, and Regina intends it for bikes that came with a non-sealed chain.

What do the 520 RX3 figures mean?

Regina's spec table rates the 520 RX3 at 34,000 N, or 7,643 lbs, average tensile strength with 2.0 mm plate thickness and 18.1 mm pins, and gives its weight as 1.56 kg per 100 links, which is 3.4 lb. The pins are larger diameter alloy carbon steel and chromized for surface hardness and wear resistance; the plates are thicker and shot peened for tensile strength and fatigue resistance; the bushings are extended and the rollers solid for durability. Each length comes with a clip type connecting link.

How do I fit the 520 RX3 to my e-moto?

A 520 chain needs 520 sprockets at both ends. On a Sur Ron Ultra Bee the live Heavy Hitter 520 Ultra Bee Super Sprocket page covers the rear and the live Heavy Hitter 520 Primary Drive Conversion page covers the front. Count the links on the chain being replaced, order the next length up, shorten the new chain to suit and join it with the supplied clip link, closed end of the clip leading in the direction of travel. Adjust the slack to your bike manual, then clean and lube it after every muddy ride. Riders who want a sealed chain in the same pitch can look at the Regina 520 ZSE.

Where can I buy the Regina 520 RX3 chain?

Right here. We sell the Regina 520 RX3 Non-Sealed Off-Road Chain Gold at GritShift, made by Regina. Browse every universal e-moto part we carry in our Universal E-Moto Parts collection.

Laisser un commentaire

Tous les commentaires sont modérés avant d'être publiés