Titanium Surron Jackshaft Nut for E-Motos

🚚 Ships within 1-2 Business Days

🚚 Ships within 1-2 Business Days

🚚 Ships within 1-2 Business Days

🚚 Ships within 1-2 Business Days

🚚 Ships within 1-2 Business Days

🚚 Ships within 1-2 Business Days

🚚 Ships within 1-2 Business Days

🚚 Ships within 1-2 Business Days

🚚 Ships within 1-2 Business Days

🚚 Ships within 1-2 Business Days

🚚 Ships within 1-2 Business Days

🚚 Ships within 1-2 Business Days

🚚 Ships within 1-2 Business Days

🚚 Ships within 1-2 Business Days

🚚 Ships within 1-2 Business Days

🚚 Ships within 1-2 Business Days

🚚 Ships within 1-2 Business Days

🚚 Ships within 1-2 Business Days

Titanium SurronSKU: 42354580357231

Color: Blue
Bike Model: Surron LBX/ Segway/ E-Ride Pro S/ 2.0 (M10)
Precio:
Precio de venta $9.99
Stock:
In Stock

Descripción

A titanium jackshaft nut machined from certified Grade 5 6AL-4V, sold in two threads: M10 for the Sur Ron LBX, Segway X160 / X260 and the E Ride Pro-S and Pro-SS 2.0, and M12 for the E Ride Pro-SS 3.0, SS 4.0, Pro-SR and newer 2.0 bikes. One nut per order, in nine finishes.

Fitment:

  • Sur Ron LBX (M10)
  • Segway X160 / X260 (M10)
  • E Ride Pro-S / Pro-SS (M10)
  • E Ride Pro-SS 3.0 / SS 4.0 / SR and newer Pro-SS (M12)

NOTE: Newer E Ride Pro-SS 2.0 bikes use the M12 nut; check your jackshaft thread before ordering. It does not fit the E Ride Pro Mini R. Torque to spec with a torque wrench and do not over-torque.

The jackshaft nut sits in the drive area where chain lube, mud and wash water collect. On a bike that gets ridden hard and hosed off, the stock steel nut corrodes, rounds and eventually fights you every time it has to come off. A titanium nut keeps its hex and will not rust onto the shaft.

Titanium Surron rates the nut at 45% lighter than OEM and states that certified Grade 5 6AL-4V gives the same strength as steel at 45% of the weight. The threads are rolled, which the maker credits with higher fatigue strength than cut threads, and the anodized or PVD finish adds corrosion protection in Blue, Burnt Blue, Black, Gold, Green, Purple, Rainbow, Teal or raw Silver.

Order by thread. The M10 nut is for the LBX, Segway and the E Ride Pro-S and original Pro-SS 2.0. The M12 nut is for the Pro-SS 3.0, SS 4.0 and Pro-SR, and E Ride has moved newer 2.0 bikes to M12 as well, so measure the shaft if you are not sure which you have.

Gastos estimados de envío

Other Recommendations