Heavy Hitter 220mm Front Brake Rotor Upgrade 2.2mm Thick

The Heavy Hitter 220mm Front Brake Rotor Upgrade 2.2mm Thick is the 2.2 mm version of the Heavy Hitter 220 mm front rotor, sold here at GritShift for the Sur Ron Light Bee X, Segway X260 and X160, E Ride Pro, Talaria and more: heat-treated 410 stainless steel, M5 x 44 mm bolt pattern, 2 lb.

Specs verified November 2026 against the live GritShift product page.

Specifications

Position Front wheel
Diameter 220 mm
Thickness 2.2 mm
Bolt pattern M5 x 44 mm
Material Heat-treated 410 stainless steel
Weight 2 lb
Construction Localized thickening in the critical cross sections
Design Maximum pad surface area and heat dissipation
Caliper fit 2.2 mm thickness suits the majority of mineral fluid calipers; confirm compatibility with your caliper
Caliper spacers Bikes that come stock with a 203 mm rotor may need 220 mm caliper spacers

What bikes does the Heavy Hitter 220mm 2.2mm front rotor fit?

  • Sur Ron Light Bee X (2017 to 2024)
  • Segway X160
  • Segway X260
  • Ventus ONE+
  • 79Bike Falcon Pro
  • 79Bike Falcon GT
  • Rawr Mantis X
  • Rawr Mantis Pro
  • E Ride Pro-S
  • E Ride Pro-SS
  • E Ride Pro-SS 2.0
  • Talaria Sting MX3
  • Talaria Sting MX4
  • Talaria XXX
  • Stage2 M2
  • ReRode R1 (requires 220 mm caliper spacers)
  • ReRode R1+ (no caliper spacers needed)
  • Zero XB

Why choose the 2.2 mm front rotor over the 3 mm version?

Caliper clearance. Heavy Hitter sizes the 2.2 mm thickness for the majority of mineral fluid calipers, and still asks you to confirm compatibility with your own caliper before ordering. The thinner disc keeps the same 220 mm diameter, the same M5 x 44 mm bolt pattern and the same heat-treated 410 stainless steel as the 3 mm rotor; only the thickness changes, so a rider whose caliper will not clear a 3 mm disc gets the same larger rotor in a section that fits.

How does a 2.2 mm rotor resist warping?

Through where the metal is placed rather than how much of it there is. The disc is thickened locally in its critical cross sections and its 410 stainless steel is heat-treated, which is how Heavy Hitter gets serious braking performance without warping from a 2.2 mm section. Heavy Hitter builds it to handle the heat and load of hard e-moto riding that fails most aftermarket rotors, while the 220 mm outline gives maximum pad surface area and heat dissipation and the heat treatment gives it durability and long service life.

Will I need 220 mm caliper spacers?

Only if your bike came stock with a 203 mm rotor; a 220 mm disc moves the braking surface outward, and the caliper has to follow it. That applies to the ReRode R1, which requires 220 mm caliper spacers, while the ReRode R1+ needs none.

Which rear rotor pairs with it?

The Heavy Hitter 220mm Rear Brake Rotor Upgrade 2.2mm Thick, which carries the same material and thickness drilled for the rear hub. If your calipers accept a thicker disc, the 3 mm pair is the 220mm Front Brake Rotor Upgrade 3mm Thick and 220mm Rear Brake Rotor Upgrade 3mm Thick; the E Ride Pro-SS 3.0, 4.0 and SR take their own SR/3.0 rotors.

Where can I buy the Heavy Hitter 220mm Front Brake Rotor Upgrade 2.2mm Thick?

Right here. We sell the Heavy Hitter 220mm Front Brake Rotor Upgrade 2.2mm Thick at GritShift. Browse every Heavy Hitter part we carry in our Heavy Hitter collection.

Deja un comentario

Todos los comentarios son moderados antes de ser publicados