E Ride Pro OEM Carbon Drive Belt - S / SS / Mini / Mini R

🚚 Ships within 1-2 business days

E RideSKU: E7006

Price:
Sale price $64.99
Stock:
In Stock

Product Info

This Dayco HT Power Carbon belt is E Ride's OEM drive belt for the Pro S, Pro SS 2.0, Mini and Mini R electric dirt bikes, part number E7006. E Ride specs it at 8M, 560 mm long and 16 mm wide. Sold as a single belt.

Fitment:

  • E Ride Pro S / SS / 2.0
  • E Ride Pro Mini / Mini R

NOTE: Mini and Mini R need the new version pulleys, 22 tooth front and 37 tooth rear

This is the belt between the motor pulley and the drive belt pulley, and a carbon one: Dayco builds the HT Power Carbon around a hybrid cord that combines glass with carbon fibers, set in an HNBR rubber body loaded with fibers. You need it when the old belt is damaged. The owner's manuals for these bikes say that when foreign objects get into the drive and cause abnormal damage to the belt, it gets replaced promptly. Dayco rates this belt family from -22°F to 266°F and describes it as its best for shock load and temperature resistance.

Dayco faces the teeth with a fabric that combines PTFE with nylon to cut friction, noise and wear. Along with the new belt, the manuals call for a look at the pulley, which is replaced too if it is damaged. Edge wear is handled by model: on the Pro S and Pro SS 2.0 the manual says to inspect the jackshaft axle and bearings for damage, and on the Mini it calls for the belt alignment to be readjusted.

With the new belt fitted, tension gets checked every 300 miles or every 3 months. The Pro S and Pro SS 2.0 manual gives the test: push the belt up and down at the midpoint between the two pulleys, and more than 1/8 inch of movement means it needs to be tightened again. When sediment collects in the transmission system after riding in harsh environments, rinse it with clean water before riding again.

Estimate shipping

Other Recommendations