DirtyBike 12mm Swingarm Bearing Kit - E Ride Pro-SR / SS 3.0

🚚 Ships within 1-2 business days

eDirtyBikeSKU: EP-SR-SABK-ZY

Price:
Sale price $18
Stock:
In Stock

Product Info

A swingarm bearing kit for E Ride Pro bikes with the 12 mm mid shaft: the Pro-SR, the 3.0 and the 2026 and newer 2.0. The bearings are DirtyBike Black Stripe deep groove rubber sealed units in GCr15 steel.

Fitment:

  • E Ride Pro-SR
  • E Ride Pro-SS 3.0
  • E Ride Pro-SS 2.0 (2026 and newer only, 12 mm mid shaft)

NOTE: Does not fit the 2025 and older E Ride Pro 2.0 or the Pro-S, which use a 10 mm shaft. Swingarm bearings cannot be pressed through the swingarm: remove the inner bearings from the inside and the outer bearings from the outside.

The E Ride Pro SR, 3.0 and 2026 and newer 2.0 use a 12 mm mid shaft, so their swingarm bearings are not the same as the 10 mm bikes. This DirtyBike kit is the 12 mm version for swingarm maintenance on those models.

DirtyBike's exclusive Black Stripe bearings are deep groove and rubber sealed, made from GCr15 steel that the maker says withstands much heavier loads and higher speeds than the stock bearings and lasts much longer as a result.

Check the shaft size before ordering; a 10 mm bike needs DirtyBike's other swingarm kit. When you do the job, the bearings come out toward their own side of the swingarm, and DirtyBike offers a removal tool for it.

Estimate shipping

Other Recommendations