Heavy Hitter Rogue 2.5 Inch Extended E Ride Billet Swingarm

Save 16%

🚚 Ships within 24 hours (Mon-Fri)

Heavy HitterSKU: SQ2978426

Price:
Sale price$759 Regular price$899
Stock:
In Stock

Product Info

The Heavy Hitter Rogue Swingarm is a fully welded one-piece 6061-T6 billet aluminum swingarm for the E Ride Pro, 2.5 inches longer than stock. The stock swingarm bends under hard riding through whoops, fast corner entries and jump landings, even at stock power. The Rogue takes swingarm failure off the list of ways a race ends, and it protects the drivetrain parts a bent arm destroys. The kit includes the swingarm, an adjustable Delrin chain guide, axle blocks, bearing sleeves and a chromoly linkage bolt.

Fitment:

  • E Ride Pro S / SS / 2.0 / 3.0 / 4.0 / SR

The extra length adds traction, control and cornering speed, and brings the wheelbase close to that of a Sur Ron Ultra Bee. Heavy Hitter strongly recommends pairing it with the Adjustable Height E Ride Suspension Triangle, because the longer arm changes how the rear shock works.

The pivot runs upgraded needle bearings rated at 6,500 lbf static load each, against 1,030 lb for the stock bearings. The jackshaft retaining sleeve is 52100 nitrided steel, and 10 mm and 12 mm sleeves are both in the box. The chain runs around a lowered center cross support instead of through it, and the guide adjusts for 48T to 58T sprockets.

It weighs 12.14 lb. Captured left and right axle blocks adjust with a single tool.

Installation takes 5 mm and 3 mm Allen wrenches, T30 and T40 Torx bits, a torque wrench and blue medium-strength thread locker. Put thread locker on the steel brake bracket pin as well. The tech sheet gives every torque value.

Download Tech Sheet (Assembly & Torque Specs)

Detailed Specs

Estimate shipping

Other Recommendations