Electro & Co ETM RTR 12 inch Supermoto Wheel Set installed

The Electro & Co ETM RTR 12" Supermoto Wheel Set sold here at GritShift is a direct-fit front and rear wheel pair for the ETM RTR and ETM RTR Lite. It arrives with Kenda Curve supermoto tires pre-mounted and the brake rotors and hardware included, a bolt-on swap with no modifications, 30 lb for the set.

Specs verified October 2026 against the live GritShift product page.

Specifications

Wheel size 12 in front and rear
Tires Kenda Curve, pre-mounted
Included Brake rotors and all necessary hardware
Not included Chain and sprockets; reuse yours or buy separately
Recommended gearing RTR 73T rear sprocket (Electro & Co); the stock sprocket is compatible
Installation Bolt-on, no modifications required
Weight 30 lb
Fitment ETM RTR, ETM RTR Lite

What bikes does the ETM RTR 12" Supermoto Wheel Set fit?

  • ETM RTR
  • ETM RTR Lite

What is included with the 12 in supermoto wheels?

Each set is two complete 12 in wheels with Kenda Curve tires already mounted, plus the brake rotors and the hardware needed to fit them. Electro & Co leaves the chain and sprockets out, so you reuse the ones on the bike or buy new.

How does the supermoto set change the ETM RTR?

The stock ETM RTR rolls on off-road wheels. Swapping to this set puts the bike on 12 in supermoto wheels with street-biased Kenda Curve rubber, which the maker says grips across pavement and mixed surfaces. Electro & Co describes the build as lightweight, keeping unsprung weight low so steering response and ride feel improve. The maker recommends its RTR 73T rear sprocket for gearing on the smaller wheel, though the stock sprocket also works.

How do I install the ETM RTR supermoto wheel set?

It is a bolt-on job with no cutting or modification. Remove the stock wheels, move your chain and sprockets across if you are keeping them, and fit the new wheels with the rotors and hardware supplied in the box. Torque the axle nuts and rotor bolts to the values in your ETM RTR service documentation and re-check them after the first ride.

Where can I buy the Electro & Co ETM RTR 12" Supermoto Wheel Set?

Right here. We sell the Electro & Co ETM RTR 12" Supermoto Wheel Set at GritShift, made by Electro & Co. The same platform also has a 14" Street Wheel Set. Browse every ETM RTR part we carry in our ETM RTR Parts collection.

Leave a comment

All comments are moderated before being published