The Heavy Hitter Grappler Stainless Steel Foot Peg Cleat Kit is a set of 26 threaded stainless steel cleats from Heavy Hitter, sold by GritShift, that replace worn or damaged cleats on Heavy Hitter Grappler billet footpegs. The kit covers both pegs, comes in a raw silver finish, weighs 0.1 lb, and each cleat torques to 3.0 Nm.
Specs verified September 2026 against the live GritShift product page and the Heavy Hitter Grappler footpeg tech sheet.
Specifications
| Material | Stainless steel |
|---|---|
| Finish | Raw silver |
| Quantity | 26 cleats, covering the left and right footpeg |
| Thread | M4×0.7 (Grappler footpeg tech sheet) |
| Weight | 0.1 lb |
| Cleat torque | 3.0 Nm (2.2 ft·lb), per the Grappler footpeg tech sheet |
| Tools | 7 mm wrench or socket, plus a torque wrench |
| Thread locker | Medium-strength (blue) |
| Fits | Heavy Hitter Grappler Billet Footpegs |
What footpegs does the Grappler cleat kit fit?
- Heavy Hitter E-Moto Grappler Billet Foot Pegs
- Heavy Hitter ETM RTR Grappler Billet Footpegs (see the ETM RTR Grappler footpeg specs)
When should the Grappler cleats be replaced?
When the cleats on the pegs start to round off or lose bite, boot grip drops with them. Heavy Hitter positions this kit as the drop-in fix and as a direct upgrade to standard cleat options: a fresh set of 26 stainless cleats restores the grip and extends the service life of the footpegs instead of retiring them. Stainless steel resists corrosion and holds up longer than standard replacements, and the raw silver finish keeps the look consistent with the Grappler footpeg design.
How are the replacement cleats installed?
Each cleat is a threaded stud that screws into the Grappler peg body. The Heavy Hitter Grappler footpeg tech sheet gives the cleat thread as M4×0.7 and the torque as 3.0 Nm (2.2 ft·lb), using a 7 mm wrench or socket, a torque wrench and medium-strength blue thread locker on the threads. Swap the worn cleats, torque the new ones down, and the pegs are back to full grip. The figures are on the Heavy Hitter Grappler Billet Footpegs tech sheet (PDF).
What is in the box?
- 26× stainless steel replacement cleats in raw silver, enough for the left and right footpeg
Where can I get it?
The Heavy Hitter Grappler Stainless Steel Foot Peg Cleat Kit is made by Heavy Hitter and sold by GritShift.
