The Heavy Hitter Adjustable Billet Display Mount is a 7075 billet aluminum single-sided display mount, made by Heavy Hitter and sold here at GritShift, for the E Ride Pro-S, Pro-SS, Pro-SS 2.0, 3.0, 4.0 and Pro-SR and for Talaria bikes running the upgraded ChangCheng display. It clamps a 31.8 mm bar, weighs 0.56 lb and installs in about 10 minutes.
Specs verified September 2026 against the live GritShift product page and the Heavy Hitter tech sheet.
Specifications
| Material | 7075 billet aluminum |
|---|---|
| Weight | 0.56 lb |
| Bar clamp diameter | 31.8 mm |
| Mount style | Single-sided, works alongside most direct mount stems without modification |
| Adjustment | Forward, middle or rear position; display angle adjustable toward the rider |
| Hardware | Included; stainless steel |
| Torque, M5 screws | 4.5 Nm (3.3 ft·lb) |
| Torque, M4 screws | 2.2 Nm (1.6 ft·lb) |
| Tools | 3 mm and 4 mm Allen wrench, torque wrench, medium-strength thread locker |
| Install time | About 10 minutes |
| Moto bars | A shim kit is required with true moto bars |
| Tech sheet | Heavy Hitter Adjustable Billet Display Mount assembly guide (PDF) |
What bikes does the Heavy Hitter billet display mount fit?
- E Ride Pro-S
- E Ride Pro-SS
- E Ride Pro-SS 2.0
- E Ride Pro-SS 3.0
- E Ride Pro-SS 4.0
- E Ride Pro-SR
- Talaria with the upgraded ChangCheng display
Why replace the OEM display mount?
The OEM display mounts are incompatible with upgraded direct mount stems. Heavy Hitter's mount solves that with a single-sided design that works alongside most direct mount stems without modification, so a rider who fits a direct mount stem does not lose the display. The multi-position adjustment lets you mount the display forward, middle or back while keeping the screen angled directly toward you, and the mount fits the ChangCheng display on any bike with a 31.8 mm handlebar.
What is in the box?
- 1 x handlebar clamp ring
- 1 x adjustable display pivot arm
- 1 x main clamp body
- 2 x stainless steel socket-head screws M5x0.8x12
- 3 x stainless steel socket-head screws M4x0.7x12
- 2 x stainless steel hexagon socket button head screws M5x0.8x16
- 1 x stainless steel socket-head screw M4x0.7x8
How do I install the display mount and what are the torque values?
Heavy Hitter rates the install at about 10 minutes with a 3 mm and a 4 mm Allen wrench and a torque wrench, using medium-strength (blue) thread locker on the screws. The tech sheet gives two torque values: the M5x0.8x12 and M5x0.8x16 screws go to 4.5 Nm (3.3 ft·lb), and the M4x0.7x12 and M4x0.7x8 screws go to 2.2 Nm (1.6 ft·lb). The exploded diagram with each screw's position is in the assembly guide (PDF).
Does it fit moto bars or narrow bend bars?
The clamp is sized for a 31.8 mm handlebar. If you are running true moto bars, a shim kit is required. With most narrow bend bars you will not be able to center the mount on the centerline of the bike. Riders pairing the mount with a direct mount stem can read the Heavy Hitter 2 Inch Riser Direct Mount Stem specs for the 31.8 mm stem or the Heavy Hitter MX Direct Mount Riser for 1 1/8 in bars.
Where can I buy the Heavy Hitter Adjustable Billet Display Mount?
Right here. We sell the Heavy Hitter Adjustable Billet Display Mount at GritShift. Browse every Heavy Hitter part we carry in our Heavy Hitter collection.
