Heavy Hitter 240mm Rear Brake Rotor Upgrade 3mm Thick XE Pro R

The Heavy Hitter 240mm Rear Brake Rotor Upgrade 3mm Thick XE Pro R is a 240 mm rear rotor Heavy Hitter builds for the Arctic Leopard XE Pro R, sold here at GritShift: heat-treated 410 stainless steel, 3.00 mm thick, M6 x 54 mm bolt pattern, 1.5 lb, for riders stepping up from a 220 mm rear disc.

Specs verified November 2026 against the live GritShift product page.

Specifications

Position Rear wheel
Diameter 240 mm
Thickness 3.00 mm
Bolt pattern M6 x 54 mm
Material Heat-treated 410 stainless steel
Weight 1.5 lb
Construction Localized thickening in the critical cross sections
Design Maximum pad surface area and heat dissipation
Caliper spacers A bike that comes stock with a 220 mm rotor may need 240 mm caliper spacers
Caliper fit 3 mm thick rotor; verify compatibility with your caliper before ordering

What bikes does the Heavy Hitter 240mm XE Pro R rear rotor fit?

  • Arctic Leopard XE Pro R

What does a 240 mm rear rotor change on the XE Pro R?

Leverage. The caliper grips the disc further from the axle than it does on a 220 mm rotor, so the same pad pressure produces more braking torque at the rear wheel, and the larger ring carries more metal to soak up heat on long descents. Heavy Hitter cuts the 240 mm outline for maximum pad surface area and heat dissipation and builds the rotor to deliver serious braking performance without warping.

Why 3 mm thick and heat-treated?

Heavy Hitter is blunt about what hard riding does to thin rotors: most aftermarket discs fail under the heat and load of aggressive e-moto riding. This one is 3.00 mm thick, thickened locally in the critical cross sections, and its 410 stainless steel is heat-treated for enhanced durability and long service life. Because it is a 3 mm disc, Heavy Hitter tells you to verify compatibility with your caliper before ordering.

Do I need 240 mm caliper spacers?

Possibly. If the bike came stock with a 220 mm rotor, the rear caliper has to move outward to sit over the larger disc, and you may need 240 mm caliper spacers to do it.

Is there a matching 240 mm front rotor?

Yes. The Heavy Hitter 240mm Front Brake Rotor Upgrade 3mm Thick XE Pro R is the same steel, diameter and thickness drilled for the front hub. The XE Pro S runs a smaller front disc, the 220mm Front Brake Rotor Upgrade 3mm Thick XE Pro S, and its rear is covered by the 220mm Rear Brake Rotor Upgrade 3mm Thick.

Where can I buy the Heavy Hitter 240mm Rear Brake Rotor Upgrade 3mm Thick XE Pro R?

Right here. We sell the Heavy Hitter 240mm Rear Brake Rotor Upgrade 3mm Thick XE Pro R at GritShift. Browse every Heavy Hitter part we carry in our Heavy Hitter collection.

Leave a comment

All comments are moderated before being published