E Ride Pro OEM 18mm Carbon Drive Belt - SS 3.0 / 4.0

🚚 Ships within 1-2 business days

E RideSKU: E7327

Price:
Sale price $69.99
Stock:
In Stock

Product Info

The 18 mm E Ride Pro OEM drive belt, part number E7327, is the Dayco HT Power Carbon belt E Ride lists for the Pro SS 3.0 electric dirt bike. It also fits the SS 4.0. Each order is one belt.

Fitment:

  • E Ride Pro 3.0 / 4.0

NOTE: The SR takes E Ride's 20 mm belt, 2 mm wider than this one

This belt runs from the motor pulley to the drive belt pulley, and Dayco makes it with a hybrid cord of glass and carbon fibers inside an HNBR rubber body reinforced with fibers. Replace yours when debris has damaged it: the SS 3.0 owner's manual says a belt with abnormal damage from foreign objects is to be replaced promptly. Dayco credits the carbon fibers with the belt's mechanical resistance and lists a working range of -22°F to 266°F for the HT Power Carbon family.

Its teeth carry a facing of PTFE and nylon, which Dayco uses to hold down friction, noise and wear. While the old belt is off, the manual wants the pulley looked over and replaced if it is damaged, and it treats a belt that wandered or wore along its edges as a reason to inspect the jackshaft axle and bearings.

After fitting, E Ride's schedule is a tension inspection every 300 miles or every 3 months. Push at the midpoint between the two pulleys: movement of more than 1/8 inch up or down means the belt needs to be tightened again. When a ride in harsh conditions leaves sediment in the transmission system, wash it out with clean water before you ride again.

Estimate shipping

Other Recommendations