Heavy Hitter V2 Talaria Skid Plate

Economisez 15%

🚚 Ships within 24 hours (Mon-Fri)

🚚 Ships within 24 hours (Mon-Fri)

🚚 Ships within 24 hours (Mon-Fri)

🚚 Ships within 24 hours (Mon-Fri)

🚚 Ships within 24 hours (Mon-Fri)

🚚 Ships within 24 hours (Mon-Fri)

Heavy HitterSKU: SQ4328513-2

Color: Silver
Prix:
Prix réduit$170 Prix normal$199
Stock:
In Stock

Description

The Heavy Hitter V2 Talaria Skid Plate is a billet aluminum motor guard for the Talaria Sting MX3, MX4 and MX5. Rocks, roots and logs hit the underside of the motor first, and earlier plates would not clear the bigger aftermarket motors. The V2 clears the EBMX XTA Core and every current aftermarket motor without modification, behind a 10 mm bash plate tested to more than 6,500 lb of force. In the box are both side rails, four plates and the stainless hardware, one kit per order.

Fitment:

  • Talaria Sting MX3 / MX4 / MX5

The strike angles are set so the bike slides over obstacles and keeps moving through technical terrain. An extended tail adds coverage at the rear, and vent slots keep the motor cool on hard rides.

The side rails are 7075-T6 billet and the whole guard weighs 3.5 lb. If you damage the bash plate, it comes off and a new one goes on in minutes.

You need a 5 mm Allen wrench, a T20 Torx bit and a torque wrench, plus blue medium-strength thread locker on all hardware. The M6 side rail screws take 10 Nm (7 ft-lb) and the M4 plate screws take 2.6 Nm (23 in-lb). The tech sheet shows each step.

Bend a side rail and Heavy Hitter replaces it free, for life. That lifetime warranty covers the rails; the bash plate is a wear part.

Download Tech Sheet (Assembly & Torque Specs)

Detailed Specs

Estimer la livraison

Other Recommendations