E Ride Pro OEM Dual Hall Throttle (No Grip) - S / SS / 2.0

🚚 Ships within 1-2 business days

E RideSKU: E7510

Prix:
Prix réduit $69.99
Stock:
En stock

Description

The E Ride Pro OEM Dual Hall Throttle is the factory twist throttle for the Pro S and Pro SS 2.0 electric dirt bikes. When a throttle sticks, cuts out or stops answering your wrist, the bike is done for the day and it is not safe to keep riding. This is E Ride's own throttle control for these two bikes, so the swap puts a fresh factory part back on the bar instead of a workaround. Each order is one throttle, and the grip is not included.

Fitment:

  • E Ride Pro S / SS / 2.0

NOTE: Leave the throttle 2 mm of end play or it can stick

E Ride brought in the dual hall version to replace the previous throttle with added safety precautions. It reads your wrist with two hall sensors, which is where the name comes from. The part number is E7510.

Error code 00700 on the display is E Ride's Throttle Error. Two easy things to rule out first, straight from the owner's manual: a throttle control plug that has come off, which leaves the motor dead, and a low battery. When neither one is the cause, E Ride's answer is a new throttle control.

The swap is a handlebar job. E Ride's setup steps use 4 mm and 5 mm hex wrenches on the bar controls, and they finish by rotating the throttle assembly to confirm it moves freely. Once it is on, turn the bars back and forth and confirm the wiring stays relaxed, with nothing pulling tight.

Pebbles, dirt and sand can pack into a throttle on the trail and dull how it responds. If yours starts to feel off, switch the power off, clean the debris out and test it again before you ride. A healthy one turns with no noise and no resistance.

Estimer la livraison

Other Recommendations