Heavy Hitter Stainless Steel M8 Sprocket Bolt Upgrade Kit installed

The Heavy Hitter Stainless Steel M8 Sprocket Bolt Upgrade Kit is a set of fully threaded 304 stainless M8 button head bolts made by Heavy Hitter for its Super Sprockets and sold here at GritShift. It fits the E Ride Pro-SR, Pro-SS 3.0 and 4.0, Arctic Leopard XE Pro and XF Pro and Talaria MX5, torqued to 15 ft lb.

Specs verified October 2026 against the live GritShift product page.

Specifications

Material 304 stainless steel, corrosion-resistant
Quantity 5 x M8 x 20 mm 304 stainless shallow button head bolts
Thread M8, fully threaded, non-stepped
Head Low-profile button head, sits flush in the recessed bolt pockets of Heavy Hitter sprockets
Weight 1 lb
For use with Heavy Hitter Super Sprocket
Torque 15 ft lb
Tools 5 mm Allen
Thread locker Apply Loctite

What bikes does the Heavy Hitter M8 sprocket bolt kit fit?

  • E Ride Pro-SR
  • E Ride Pro-SS 3.0
  • E Ride Pro-SS 4.0
  • Arctic Leopard XE Pro S
  • Arctic Leopard XE Pro R
  • Arctic Leopard XF Pro
  • Talaria MX5

The kit is designed exclusively for Heavy Hitter sprockets, such as the Heavy Hitter 428 Billet Aluminum Super Sprocket.

Why stainless steel instead of titanium sprocket bolts?

Titanium hardware offers a slight weight saving, but Heavy Hitter judged the difference minimal in this application and chose 304 stainless for its superior corrosion resistance, excellent thread life, wide availability and practical long-term ownership. The bolts are built to withstand the vibration, repeated shock loads and drivetrain torque of high-performance electric dirt bikes, and stainless threads stay serviceable, which makes later sprocket, wheel and drivetrain maintenance easier without giving up strength.

Why a fully threaded, non-stepped button head?

Heavy Hitter sprockets have recessed bolt pockets. A fully threaded, non-stepped shank with a low-profile button head sits cleanly and flush inside those pockets for a factory-quality fit and finish, with the precise fit Heavy Hitter engineered for its own sprockets.

How do I install the M8 sprocket bolts?

The kit holds five M8 x 20 mm bolts. Fit the bolts through the Heavy Hitter Super Sprocket with a 5 mm Allen, apply Loctite to the threads and torque each bolt to 15 ft lb. Stainless threads make the next sprocket or wheel service easier because the bolts come back out cleanly.

Where can I buy the Heavy Hitter Stainless Steel M8 Sprocket Bolt Upgrade Kit?

Right here. We sell the Heavy Hitter Stainless Steel M8 Sprocket Bolt Upgrade Kit at GritShift. Browse every Heavy Hitter part we carry in our Heavy Hitter collection.

Laisser un commentaire

Tous les commentaires sont modérés avant d'être publiés