The EBMX Surron Lightbee X9000 V3 Controller Plug N Play Kit is the complete EBMX controller upgrade for the Sur Ron Light Bee S and Light Bee X and the Segway X160 and X260, sold here at GritShift. It delivers 6 kW to 50 kW of tunable power on stock parts or 96V big motor builds; 10 lb.
Specs verified October 2026 against the live GritShift product page and the EBMX tech sheet.
Specifications
| Bikes | Sur Ron Light Bee S and Light Bee X; Segway X160 and X260 |
|---|---|
| Power output | 6 kW up to 50 kW, fully tunable |
| Builds supported | Stock motor and battery through full 96V big motor builds |
| Stock motor limit | OEM Sur Ron motor safely runs up to 12 kW |
| Stock battery limit | Stock Sur Ron battery, non bypassed, safely runs up to 7.5 kW |
| Rated power | 50 kW, tested to 60 kW (EBMX sheet) |
| Voltage | 120V (EBMX sheet) |
| Phase current | 1000 A, 1600 A burst (EBMX sheet) |
| Motor control | Custom EBMX VESC firmware with Field Oriented Control |
| Motor tunes | 30 plus preloaded |
| Operating temperature | -25 to 80 degrees C (EBMX sheet) |
| IO count | 68 (EBMX sheet) |
| MOSFETs | Infineon (EBMX sheet) |
| Construction | Full CNC case, interchangeable heat sinks, billet CNC bus bar system (EBMX sheet) |
| Wheel Lift Assist | Anti loop and stunt control over front end lift during acceleration, launches and climbs; not a wheelie mode |
| Kit contents | Plug and play harness, mount kit, SW102T color display, 1-2 harness, Bluetooth module, thumb throttle, heat sink with hardware |
| Circuit protection | 200 to 250 A ANL fuse and/or circuit breaker required per the installation guide (QR code in the kit) to maintain warranty coverage |
| Warranty | 2 years (stated on the product page) |
| Weight | 10 lb |
What bikes does the EBMX Light Bee X9000 V3 kit fit?
- Sur Ron Light Bee S
- Sur Ron Light Bee X
- Segway X160
- Segway X260
The product page's motor list starts with the OEM Sur Ron S and Light Bee X motors and runs through the EBMX XLB-60, EBMX XUB-80, QS138-70H and QS138-90H, plus the other motors on its compatibility list.
How much power can a stock Light Bee X take from the X9000 V3?
The controller is the same unit EBMX fits to its pro race bikes and spans 6 kW to 50 kW, but a stock Light Bee sets its own ceiling. EBMX states that the OEM Sur Ron motor safely runs up to 12 kW, and that the stock Sur Ron battery, as long as it is not bypassed, safely runs up to 7.5 kW. Beyond that the kit supports full 96V big motor builds, for example around the EBMX XLB-60 Race Motor Upgrade we carry, which is where the 50 kW rating and the 1000 A phase current on the EBMX sheet come into play.
What does the Light Bee X9000 V3 kit change about the ride?
EBMX's custom VESC firmware with Field Oriented Control gives smooth yet sharp throttle response, and 30 plus preloaded motor tunes make setup fast. Wheel Lift Assist controls front end lift during acceleration, launches and climbs; EBMX is explicit that it is an anti loop and stunt control feature, not a wheelie mode, and publishes the setup in its Wheel Lift Assist sheet. The EBMX X-9000 V3 sheet adds the hardware picture: 68 inputs and outputs, Infineon MOSFETs, a full CNC case with interchangeable heat sinks and a billet CNC bus bar system, rated for -25 to 80 degrees C.
What ships in the Light Bee X9000 V3 kit?
The box holds the Light Bee or Segway plug and play harness together with its mount kit, the SW102T color display and 1-2 harness, Bluetooth module, thumb throttle, and heat sink with hardware. Every V3 controller installation must have a 200 to 250 A ANL fuse and/or circuit breaker fitted according to the installation guide reached through the QR code in the kit; without it the 2 year warranty does not apply.
Where can I buy the EBMX Surron Lightbee X9000 V3 Controller Plug N Play Kit?
Right here. We sell the EBMX Surron Lightbee X9000 V3 Controller Plug N Play Kit at GritShift, made by EBMX. Browse every EBMX part we carry in our EBMX collection.
