D.I.D 428NZ Non-Sealed Clip Link Drive Chain

The D.I.D 428NZ Non-Sealed Clip Link Drive Chain sold here at GritShift is a non-sealed 428 pitch chain for e-minis and e-motos that came with a non-sealed chain, in 120 or 130 links and black or gold, with a clip type connecting link, 5,740 lb tensile strength and 2.2 lb per 100 links.

Specs verified November 2026 against the live GritShift product page.

Specifications

Type Non-sealed 428 pitch drive chain
Lengths 120 or 130 links
Colors Black or gold
Connecting link Clip type, included
Tensile strength 5,740 lb
Chain life index 410
Weight 2.2 lb per 100 links
Pins DHA treated, a hard chromium-carbide layer formed on the pin surface; quad-stake riveted into solid bushings
Pin length 0.744 in
Pin diameter 0.177 in
Plates 2 mm inner and outer
Seals None
Fitment Universal 428 chain, for bikes that came with a non-sealed chain

What bikes does the D.I.D 428NZ fit?

  • Universal: any e-mini or e-moto with a 428 pitch drive that came with a non-sealed chain from the factory; a bike that shipped with a sealed chain should stay on a sealed chain

Why run the D.I.D 428NZ instead of the stock non-sealed chain?

D.I.D says the 428NZ gives greater performance than the OEM non-sealed chain on mini and vintage bikes, and the figures behind that are a 5,740 lb tensile strength and a chain life index of 410. The pins carry D.I.D's DHA treatment, a hard chromium-carbide layer formed on the pin surface for wear resistance, and they are quad-stake riveted into solid bushings, which D.I.D credits for the chain's strength and service life.

How do I size and fit the 428NZ?

Choose the 120 or 130 link length that covers your sprocket combination, cut it down to the link count the bike needs and close it with the clip type connecting link in the box, with the closed end of the clip facing the direction of chain travel. On an e-moto running a 428 rear sprocket, the Heavy Hitter 428 billet super sprocket is the one we make for that pitch. If your bike came with a sealed chain, use the sealed D.I.D 428 VX X-ring chain instead.

The pins are 0.744 in long and 0.177 in in diameter, and the inner and outer plates are 2 mm thick, so the 428NZ runs on standard 428 sprockets.

How do I maintain a non-sealed chain?

There is no seal to hold grease inside the rollers, so the 428NZ needs the regular cleaning and lube any non-sealed chain does: clean it after wet or muddy rides, lube it while the chain is warm and check slack before the next ride. At 2.2 lb per 100 links it is a light chain, and keeping it clean is what lets the DHA pins deliver their wear resistance.

Where can I buy the D.I.D 428NZ?

Right here. We sell the D.I.D 428NZ Non-Sealed Clip Link Drive Chain at GritShift, made by D.I.D. Browse every universal e-moto part we carry in our Universal E-Moto Parts collection.

Laisser un commentaire

Tous les commentaires sont modérés avant d'être publiés