The Heavy Hitter Talaria E-Moto Grappler Billet Foot Pegs are fully CNC-machined 7075 billet aluminum footpegs, made by Heavy Hitter and sold here at GritShift, for the Talaria X3 and Talaria Sting MX3, MX4 and MX5. They carry 26 replaceable stainless steel cleats torqued to 3.0 Nm, with the center row raised 4 mm and the platform set 10 mm rearward.
Specs verified September 2026 against the live GritShift product page and the Heavy Hitter tech sheet.
Specifications
| Material | 7075 billet aluminum, fully CNC-machined |
|---|---|
| Weight | 3 lb |
| Cleats | 26 replaceable stainless steel cleats, M4 x 0.7 thread |
| Cleat torque | 3.0 Nm (2.2 ft·lb) |
| Center cleats | Raised 4 mm above the front and rear rows |
| Peg position | 10 mm rearward of the stock pegs |
| Installation | Direct bolt-on |
| Tools | 7 mm wrench or socket, torque wrench, medium-strength (blue) thread locker |
| What is in the box | 1 left footpeg, 1 right footpeg, 26 stainless steel cleats |
What bikes do the Talaria Grappler footpegs fit?
- Talaria X3
- Talaria Sting MX3
- Talaria Sting MX4
- Talaria Sting MX5
Why are the center cleats 4 mm taller?
The stepped cleat layout puts the center row 4 mm above the front and rear cleats. On the trail that gives your boot something to bite into for a more natural foot feel while the outer rows keep the grip secure, and the 10 mm rearward peg position puts your foot in a more natural, controlled position under load. Heavy Hitter designed the Grapplers as a performance-focused replacement for the stock Talaria pegs, tested across multiple high-output e-motos.
What is in the box?
- 1 Talaria footpeg, right
- 1 Talaria footpeg, left
- 26 stainless steel cleats, M4 x 0.7
How do I install the pegs and torque the cleats?
The pegs are a direct bolt-on for the Talaria. The cleats thread into the peg bodies and each one is tightened to 3.0 Nm (2.2 ft·lb) with a 7 mm wrench or socket and a torque wrench, using medium-strength (blue) thread locker. The component list and torque figure are in the Heavy Hitter Talaria Grappler Billet Footpegs tech sheet (PDF).
Where do I get replacement cleats?
When the stainless cleats wear down they unscrew and swap out without replacing the peg. Heavy Hitter sells the same M4 x 0.7 cleats as the Heavy Hitter Grappler Stainless Steel Foot Peg Cleat Kit. Riders on an ETM RTR have their own version of this peg, the Heavy Hitter ETM RTR Grappler Billet Footpegs.
Where can I buy the Heavy Hitter Talaria E-Moto Grappler Billet Foot Pegs?
Right here. We sell the Heavy Hitter Talaria E-Moto Grappler Billet Foot Pegs at GritShift.
