EBMX E Ride Pro 3.0 X9000 V3 Controller & Mount Kit

🚚 Ships within 24 hours (Mon-Fri)

🚚 Ships within 24 hours (Mon-Fri)

EBMXSKU: X9-V3-ERP3.0SS-2

Select Discharge Type: W/Out Circuit Breaker
Prix:
Prix réduit $1,299.89
Stock:
Plus que 4 en stock

Description

The EBMX X-9000 V3 Controller Kit is the definitive power upgrade for the E Ride Pro SS 3.0, delivering up to 50kW of output with VESC-based custom firmware, Field Oriented Control (FOC), and 30+ preloaded motor tunes. Built for riders running stock setups through full high-power builds, with a free app for live tuning, OTA updates, and complete ride mode customization. 100% plug-and-play with all hardware and wiring harness included.

Fitment:

  • E Ride Pro SS 3.0

Motors Not Compatible (currently in testing): ME1803 Water Cooled, QS Braaap Moto E Hub Motor

NOTE: All V3 installations require a 200A–250A ANL fuse and/or circuit breaker to maintain warranty coverage. If running OEM E Ride Pro SS 3.0 motor or stock battery (non-bypassed), safely run up to 16kW exceeding this will cause unsafe voltage sag.

The Wheel Lift Assist system uses an integrated IMU to give riders full control over front-end lift during acceleration, launches, and climbs fully tunable for anti-loop, launch control, or stunt mode. Six customizable power levels, adjustable speed limiters per ride mode, dual hall throttle support, and regen thumb throttle included. IP67 waterproof rated. Kit includes plug-and-play harness, mount kit, SW102T color display, 1-2 harness, Bluetooth module, thumb throttle, and heatsink hardware. 2-year warranty.

Specifications

EBMX X-9000 V3 Technical Specifications

(VIEW THE GENERAL INFO PDF)
(VIEW THE WHEEL LIFT ASSIST INFO PDF)

Controller Specs

  • Rated Power: 50kW (Tested up to 60kW)
  • Phase Current: 1000A Continuous / 1600A Burst (Race Mode)
  • Battery Current: 500A Max Line Current
  • Input Voltage Range: 40V – 110V
  • Operating Voltage Range: 48V – 110V (26S)
  • Max Efficiency: >95%
  • Motor Control Protocol: Field Oriented Control (FOC)
  • Firmware: VESC-Based, Custom Modified by EBMX per bike model
  • Operating Temperature Range: -25°C to 80°C (-13°F to 176°F)
  • Waterproof Rating: IP67
  • IO Count: 68 Inputs/Outputs

Construction & Hardware

  • MOSFETs: 30 x 120V Infineon
  • PCB: Multilayer design with CNC copper busbars
  • Case: Full CNC Alloy Case, Built for Harsh Conditions
  • Cooling: Optional Liquid Cooling Support
  • Connectors: Robust CNC Machined Terminals & Connections
  • Power Distribution: Billet CNC Bus Bar System

Power Modes & Control

  • 6 Fully Customizable Power Levels (e.g., Race, Street)
  • Adjustable power level sliders per mode
  • Street / Race Mode Toggle
  • Regen Tuning, Speed Limit Adjustments, Field Weakening Settings

Input & Sensor Integration

  • Throttle: Dual Hall Throttle Support (2x ADC inputs)
  • Wheel Lift Assist: Integrated IMU with programmable launch, stunt, anti-loop modes
  • Sensor Protocols: CAN, RS485, UART, PWM In/Out
  • Other I/O: Regen Throttle / E-Clutch Integration, Full Display & Sensor Support

Kit Contents

  • Plug & Play Harness
  • Mount Kit for Selected Bike
  • SW102T Color Display
  • 1-2 Harness
  • Bluetooth Module
  • Thumb Throttle
  • Heat Sink and Hardware

Estimer la livraison

Related Parts