Regina 428 ZSE Z-Ring Sealed Enduro Chain

The Regina 428 ZSE Z-Ring Sealed Enduro Chain sold here at GritShift is Regina's Z-Ring sealed 428 pitch competition chain in gold, built for e-motos and e-minis on a 428 drive that want less upkeep than a plain chain. Sold in 120, 130 or 140 links with a clip connecting link: 22,000 N (4,946 lbs) tensile strength.

Specs verified November 2026 against the live GritShift product page.

Specifications

Type Z-Ring sealed 428 pitch competition chain, gold outer plates
Length 120, 130 or 140 links, each sold as a single chain
Connecting link Clip type, included with each chain
Weight 2.4 lb (1.08 kg) per 100 links, per the Regina spec table
Average tensile strength 22,000 N (4,946 lbs)
Plate thickness 1.8 mm
Pin length 20.7 mm
Plates High carbon alloy steel, shot peened
Bushings Solid
Seal Narrow Z-Ring, developed with enduro racing teams
Fitment Universal 428 chain

What bikes does the Regina 428 ZSE chain fit?

  • Universal: any e-moto or e-mini on a 428 pitch chain drive; choose 120, 130 or 140 links to cover the link count of the chain coming off, then shorten it to match

Why pick a sealed 428 chain for an e-moto?

A Z-Ring is Regina's narrow seal, developed side by side with the best enduro racing teams, and it is what separates the ZSE from a plain 428 chain. The seal keeps the factory lube inside the rollers, so the chain goes longer between adjustments than a non-sealed one, while the narrow ring shrinks the chain's width and cuts articulation friction so the sealed chain still runs light. The plates are high carbon alloy steel and shot peened for the reliability Regina expects of a sealed competition chain.

What do the 428 ZSE figures mean?

Regina's spec table puts the 428 ZSE at 22,000 N, or 4,946 lbs, average tensile strength on 1.8 mm plates with a 20.7 mm pin length. The bushings are solid, the outer plates are gold, and the chain weighs 1.08 kg per 100 links, which is 2.4 lb. Every length ships with a clip type connecting link, so the loop closes without buying a master link separately.

How do I fit the 428 ZSE to my bike?

A 428 chain needs 428 sprockets at both ends; the live Heavy Hitter 428 Billet Aluminum Super Sprocket page covers the rear sprocket side for the bikes it fits. Count the links on your old chain, order the next length up, shorten the new one to match and close it with the supplied clip link, clip opening facing away from the direction of travel. Set the slack from your bike manual and rinse rather than scrub the seals after muddy rides. For bikes on a 520 drive, the Regina 520 ZSE is the same chain in the larger pitch.

Where can I buy the Regina 428 ZSE chain?

Right here. We sell the Regina 428 ZSE Z-Ring Sealed Enduro Chain at GritShift, made by Regina. Browse every universal e-moto part we carry in our Universal E-Moto Parts collection.

Laisser un commentaire

Tous les commentaires sont modérés avant d'être publiés