Heavy Hitter 240mm Front Brake Rotor Upgrade 3mm Thick XE Pro R

Sold here at GritShift, the Heavy Hitter 240mm Front Brake Rotor Upgrade 3mm Thick XE Pro R is the largest front disc Heavy Hitter makes for the Arctic Leopard XE Pro R: 240 mm in diameter, 3.00 mm thick, heat-treated 410 stainless steel on an M6 x 50 mm bolt pattern, 2 lb.

Specs verified November 2026 against the live GritShift product page.

Specifications

Position Front wheel
Diameter 240 mm
Thickness 3.00 mm
Bolt pattern M6 x 50 mm
Material Heat-treated 410 stainless steel
Weight 2 lb
Construction Localized thickening in the critical cross sections
Design Maximum pad surface area and heat dissipation
Caliper spacers A bike that comes stock with a 220 mm rotor may need 240 mm caliper spacers
Caliper fit 3 mm thick rotor; verify compatibility with your caliper before ordering

What bikes does the Heavy Hitter 240mm XE Pro R front rotor fit?

  • Arctic Leopard XE Pro R

Why put a 240 mm rotor on the front of an XE Pro R?

The front brake does most of the stopping, so the front disc takes most of the heat. Going from 220 mm to 240 mm gives the caliper more leverage over the wheel and the rotor more surface to shed heat through, which is why Heavy Hitter designs the 240 mm outline for maximum pad surface area and heat dissipation. Heavy Hitter engineers the rotor for serious braking performance without warping.

How is the front disc built?

Heat-treated 410 stainless steel, 3.00 mm thick, with localized thickening in the critical cross sections where braking loads concentrate. Heavy Hitter chose the heat treatment for enhanced durability and long service life, so the disc survives the heat and load of aggressive riding that kills most aftermarket rotors. The front bolt pattern is M6 x 50 mm.

Will the stock XE Pro R front caliper line up?

Not without checking two things. If the bike came stock with a 220 mm rotor, the caliper may need 240 mm caliper spacers to reach the larger disc, and because this is a 3 mm thick rotor you should verify compatibility with your caliper before ordering.

What rear rotor goes with the 240 mm front?

The Heavy Hitter 240mm Rear Brake Rotor Upgrade 3mm Thick XE Pro R, same steel and thickness drilled for the rear hub. The XE Pro S is a different bike with a different front disc, the 220mm Front Brake Rotor Upgrade 3mm Thick XE Pro S.

Where can I buy the Heavy Hitter 240mm Front Brake Rotor Upgrade 3mm Thick XE Pro R?

Right here. We sell the Heavy Hitter 240mm Front Brake Rotor Upgrade 3mm Thick XE Pro R at GritShift. Browse every Heavy Hitter part we carry in our Heavy Hitter collection.

Leave a comment

All comments are moderated before being published