Hayes Dominion A4 brake lever installed on handlebar, close-up

The Hayes Dominion A4 Brake Kit sold here at GritShift is a universal four-piston hydraulic brake with a cold-forged caliper, DOT 5.1 fluid and a Kevlar hose. Its 70.9 in (180 cm) line is sized for a rear install and can be shortened for the front, with new line fittings in every kit.

Specs verified October 2026 against the live GritShift product page

Specifications

Type Hydraulic disc brake, lever, hose and caliper
Caliper Dominion A4, four pistons, cold-forged, Kingpin structural pad retention bolt
Pistons Metal, per Hayes
Lever Sealed ball bearings at the blade pivot, glide ring on the piston, adjustable reach knob
Bite point Factory set for the lowest dead stroke and a crisp bite point; QuickBite² system
Fluid DOT 5.1
Hose Kevlar
Bleed Two-Stroke dual-port bleed system
Alignment Crosshair caliper alignment screws
Line length 70.9 in (180 cm), suited to a rear install; shorten slightly for the front
Included New brake line fittings in each kit
Finish Black or Purple
Fitment Universal

What bikes does the Hayes Dominion A4 brake kit fit?

  • Universal. Check your caliper mount standard, rotor size and hose routing before ordering

Why fit a Hayes Dominion A4 to an e-moto?

Hayes builds the Dominion around lever feel. The master cylinder is factory tuned for the shortest possible dead stroke and a crisp bite point, the lever blade pivots on sealed ball bearings with a glide ring on the piston for a featherlight pull, and the QuickBite² system keeps that feel consistent. The A4 caliper carries four metal pistons in what Hayes calls its most structurally rigid design, cold-forged with a Kingpin pad retention bolt that adds stiffness.

Is the Dominion A4 a front or rear brake?

Both, from one kit. The hose is 70.9 in (180 cm) long, which Hayes describes as suited to a rear brake, and the kit is primarily used at the rear. For the front you shorten the line slightly to the correct length; new brake line fittings are included in each kit for that job.

How is the Dominion A4 set up and maintained?

Crosshair caliper alignment screws let you square the caliper to the rotor quickly, and the reach knob adjusts lever position on the trail without tools. For service, the Two-Stroke dual-port bleed system is designed for bleed integrity and easy maintenance, and the system runs DOT 5.1 fluid across all temperatures. Torque the caliper and lever clamp bolts to the values in your bike's documentation.

Where can I buy the Hayes Dominion A4 Brake Kit?

Right here. We sell the Hayes Dominion A4 Brake Kit at GritShift, made by Hayes. Browse every universal e-moto part we carry in our Universal E-Moto Parts collection.

Leave a comment

All comments are moderated before being published